Produced by Huayan Company, PET injection mold is the core part of the system. The whole mold adopts Italian pneumatic valve hot track technology and components, and is equipped with PID non-contact SSR pressure regulator temperature control, one temperature control point per cavity. , Accurate temperature control, ensure the stability of preform production.
The system is equipped with fast picking robots from Japan's Panasonic, Mitsubishi, and servo systems, and a four-station water-cooled cooling system for preforms to ensure that the preforms are fully cooled. The working principle is that the injection molding machine can maintain the pressure immediately after plastic injection and the plasticization is completed. The mold temperature is very high at this time. The robot advances the billet and conveys the preform to the cooling device. The injection molding machine immediately enters the next production cycle. The preforms are automatically unloaded and packed after being cooled in four production cycles. According to the actual production measurement, the equipment can improve the production efficiency by 35% and the energy saving by 35% compared with the ordinary preform production method. At the same time, the preform is not touched by human hands.
Reducing bottle blank contamination, product surface quality, yield, and hygiene are greatly enhanced.
Reprinted from: Foreign Plastics
Auto parts are a product of every unit and service vehicle of the automobile. The main parts are Engine Parts, Transmission Parts, steering gear parts, driving accessories, ignition accessories, fuel gas accessories, cooling system accessories, lubrication parts, electrical instrument fittings, etc.
Auto Accessories,Engine Parts,Transmission Parts,Countersunk Rivets
Ninghai Feisheng Hardware Co., Ltd. , http://www.nbfeisheng.com