The placement of high and low temperature test chambers is exquisite. If placed improperly, it will not only affect the test results, but also affect the life of the test chamber. How to correctly place the high and low temperature test chamber? Here is a description for you:
1. The distance between adjacent walls or objects is greater than 60 cm.
2. It should be placed in a place where the annual temperature is 5 °C ~ 30 °C (average temperature within 24 hours ≤ 30 °C) and the relative humidity is less than 85%.
3. The ambient temperature of the installation site of the high and low temperature test chamber should not be changed drastically.
4. It should be installed on a level ground (the level is determined on the ground when installing).
5. It should be installed in a place without direct sunlight.
6, should be installed in a well-ventilated place.
7. It should be installed away from combustibles, explosives and high temperature heat sources.
8. The high and low temperature test chamber should be installed in a place with less dust.
9. Configure the device with a corresponding capacity of air or power switch, and this switch must be used independently for this device.
Farm Tarpaulins,Camouflage Tarpaulin,Agriculture Tarpaulin,Tarpaulin For Agriculture
Henan Fengcheng Plastic Co.,ltd , https://www.fcsyplastic.com