Before applying glazing wax to your furniture, always check the condition of the lacquer surface. For newly purchased wooden furniture, start by gently wiping the surface with a soft cotton cloth. If there are stubborn stains that have been left for a long time, you can use a small amount of gasoline or alcohol on a cotton cloth to remove them effectively. However, be cautious and test it on a small area first to avoid damaging the finish. Yachen Office Furniture: http://yc.cnjiaju.com/share
Once the surface is clean, take a small piece of cotton cloth and apply a generous amount of glazing wax onto it. Then, use a dry cloth to spread the wax evenly in circular motions, ensuring full coverage without leaving any visible marks. Be careful not to over-apply the wax, as excessive amounts can cause streaks, reduce shine, and even weaken the paint layer over time, making it difficult to remove later.
With so many types of glazing waxes available on the market, it's best to stick with one type and become familiar with its properties rather than switching frequently. If the paint layer has been damaged, address the issue before waxing. For example, if the surface is scorched by a cigarette, only the top layer of paint may be affected. In this case, you can dampen the area with water, lightly sand it with fine-grit wet sandpaper, and then apply the wax. For minor scratches where the wood is visible, simply polish the area with glazing wax. A shoe polish of a similar color can also serve as an effective alternative.
If you notice white rings caused by a hot tea cup, try rubbing a small amount of vegetable oil onto the mark and wiping it with a cloth. If the stain persists, soak a piece of cotton cloth in warm water, wring it out, and add a few drops of ammonia before gently rubbing the area. Finally, buff the surface with glazing wax to restore its shine and protection.
Colorful Balloons,Decorative balloon,Paste linking balloon
Xiongxian Tonghai Latex Products Co., Ltd , https://www.balloontonghai.com