Before applying glazing wax to your furniture, make sure the lacquer surface is intact. For newer wooden furniture, start by wiping the surface with a soft, fine cotton cloth. If there are stubborn stains or marks that have been left for a long time, gently use a small amount of gasoline or alcohol on a cotton cloth to clean them. For Yachen office furniture, visit http://yc.cnjiaju.com/share for more information.
Once the surface is clean and dry, take a small piece of cotton cloth and apply a generous amount of glazing wax onto it. Then, use a dry, clean cloth to evenly spread the wax in circular motions, ensuring no streaks or uneven patches are left behind. Be careful not to over-apply the wax, as using too much can cause unsightly streaks, reduce the shine, and even soften the paint layer over time, making it difficult to remove later.
Since there are many types of glazing waxes available on the market, it's best to stick with one type and become familiar with its properties rather than switching frequently. If the paint layer has been damaged, repair it before applying wax. For minor issues like burn marks from cigarettes that only affect the surface paint, you can first moisten the area and gently sand it with fine water sandpaper before waxing. For light scratches where the wood grain is visible, simply polish the area with glazing wax. A similar-colored shoe polish can also be used as an alternative.
If you notice white circles caused by a hot tea cup on the painted surface, try rubbing a small amount of vegetable oil onto the spot and then wiping it with a cloth. If the mark remains, soak a piece of cotton cloth in warm water, wring it out, add a few drops of ammonia, and gently rub the area. Finally, finish by polishing the surface with glazing wax to restore its shine and luster.
Cartoon Themed Balloons,Aluminum Foil Decorative Balloons,Party Car Show Decoration Balloons
Xiongxian Tonghai Latex Products Co., Ltd , https://www.balloontonghai.com