[ Chinese wardrobe network ] introduction
The four-door wardrobe is the most common type of wardrobe. The four-door wardrobe is the wardrobe of four doors. The space of the four-door wardrobe itself is relatively large, and it can also store more clothes. Some seasonal clothes can be stored inside. The four-door wardrobe is generally made of solid wood wardrobes and panel wardrobes, which are suitable for use in a square room.
Four-door wardrobe size
The height of the cabinet for hanging short coats or suits is not less than 80cm; the height of the cabinets for hanging long coats is not less than 1300cm; the height of drawers is not less than 150cm~200cm; as for the cabinets with stacked clothes, the width after folding of clothes In view of the design, the width of the cabinet is between 330cm and 400cm, and the height is not less than 350cm. The height of the hanging wardrobe is 40~60mm from the top of the clothes rail to the top of the cabinet. The depth of the wardrobe is mainly considered by people. Shoulder width factor, generally 600mm, should not be less than 500mm. For the height of the space inside the cabinet, it can be divided into 3 to 4 layers according to the height of the shelf between the height of not less than 450 mm. Generally, when the wardrobe is not equipped with a clothes booth, the height is divided into 3 layers, and the user should be given a choice of the 4th floor.
Four-door wardrobe installation
After we have selected the four-door wardrobe that suits us, we can start the installation. However, the four-door wardrobe is divided into a door sliding track and a spring hinge. The two installation methods are different.
Spring hinge door wardrobe installation steps
1. Prepare the installation tool, Phillips screwdriver, newspaper or carton, etc.
2. Inventory the classification of each board. If you have separate drawers and pants racks, you can assemble them first and put them aside.
3. First find out the four base combination plates and base plate, screw in the black screw link, tighten the screws, and fix the floor and base together. Screw the prepared black screws and metal screws into the screw holes of the base, and screw the middle side plate and the back plate into the corresponding positions at the same time.
Sliding rail door wardrobe installation steps
The sliding rail door wardrobe installation steps are almost the same as the first few steps of the spring hinge, the difference between the last and the last. After installing the cabinet, fix the upper and lower slide rails on the base and the top. Then put the door into the track like an window. This type of wardrobe installation will be a bit more difficult, but it actually looks bigger and bigger in life, and it is convenient to use.
Four-door wardrobe interior pattern
From the overall pattern, the following three patterns can meet the needs of most homes for wardrobes:
The first type, the top of which is two top boxes with wide width but low height, can be used to store seasonal mattresses, bedding and so on. The space under the top box on the left side is divided into two parts, the right side is used for hanging clothes that are inconvenient to fold, such as long coats, dresses, suit pants, etc., and the right side is divided into three equal large cabinets. Both are used to place folded pants. The space under the right top box is divided into upper and lower parts. The upper part is used to hang some short clothes, short skirts and other short clothes. The space below is made into two drawers, which can store underwear and socks. Or other small pieces are soft.
Four-door wardrobe disassembly
After receiving the parts of the manufacturer's series of wardrobes, separate the different parts and start the installation of the wardrobe.
Step 1: Give the bottom plate and the foot strip a three-in-one connector. When installing the three-in-one connector, the direction of the notch of the screw of the three-in-one connector must be upward, and then fixed with a tool. If the direction is wrong, the screw will not be fixed.
Step 2: Lock the short leg to the wardrobe foot.
Step 3: Lock the bottom plate with the foot bar. After aligning the hole position, tighten the screw.
Step 4: Put the moisture-proof nail on the bottom of the base, and the bottom plate is completed.
For the installation of the wardrobe, as long as there is a simple manual, coupled with the required tools and certain helpers, can be assembled, and the difficulty is not very high, but Xiaobian believes that for more complex wardrobes, it is best to please Professional personnel are assembled.
The disassembly of the wardrobe is much simpler than the assembly. As long as the tools are prepared, such as the electric drill, there is a word, from the inside to the outside, from top to bottom, the screws are removed and removed one by one. Just fine.
The nervous system is a system in the body that plays a leading role in the regulation of physiological functions and activities. It is mainly composed of nervous tissues and divided into two major parts: the central nervous system and the peripheral nervous system.The central nervous system includes brain and spinal cord again, and the peripheral nervous system includes cranial and spinal nerves.
This model is suitable to medical institutions to explain human anatonv, such as thoracic surgery and internal medicine curriculum as visual aids, can be used for classroom health demonstrations and anatomy teaching aids and can also be used for children's educational toys.
Nerves Model,Nervous Tissue Model,Nervous System Model,Nervous System Project Model
Xinxiang Vic Science&Education Co.,Ltd. , https://www.hnbiologyspecimen.com