[Office Partner Information Center] 1. Always clean the lens and reflective lens. At the same time, in the process of use, it must be ensured that the light source is clean, and there is no obstacle to cause shading to make the light path unreachable, thus affecting exposure, charging, transfer or power-off.
2, the first is how to determine whether the copier is working properly. This is a prerequisite for the normal use of the copier. Under normal circumstances, the copier is easy to start up when it is working normally, the machine is shipped very smoothly, and there is no abnormal sound, and there is no excessive temperature. If the above situation occurs during use, it indicates that there is a problem with the machine, and it needs to be stopped immediately, instead of paying attention when the fault is serious.
3, after a certain amount of copying, maintenance is also required. For example, when copying to 3000 sheets, maintenance is required. Need to take out the waste toner box, pour off the discarded toner, wipe the box into the machine, then pull out the electrodes, wipe the wire, the wire wire and the electrode holder to ensure the cleaning of these parts. At the same time, it is necessary to clean the upper and lower guide plates at the bottom of the developer, the separation roller and the separation belt, and then clean the platen glass to ensure that the cleaning of these components can effectively extend the life of the copier and reduce the occurrence of malfunctions. When copying 10,000 sheets, it is necessary to not only clean the above components, but also to remove the developing device, remove the dustproof plate on the developing roller, and inspect the surface of the developing roller. If an exception is found, it needs to be processed. Simultaneously wipe the paperboard at the paper feed port to ensure that there are no paper dust and sludge. Then remove the fuser cover and replace the fixing cleaning felt and the upper and lower separation claws. Remove the toner and grease that have fallen to the lower part of the fuser, and then remove the lower surface of the original glass to clean it. Remove the toner cartridge and wipe it with lens paper. Because too much waste toner is deposited inside the machine, it will not only affect the normal use, but also cause the parts to burn out. This kind of cleaning method can solve the problem of excessive waste toner.
Electric towel rack refers to a towel rack that uses electric heating to dry towels. It is a supporting product of high-grade bathroom. The bathroom environment is closed and humid, and the towel is hung in the bathroom for a long time, which is easy to breed bacteria. Regular towel drying and disinfection has become a need, and the intelligent and convenient electric towel rack came into being. Kaiping Yufa Sanitary Ware Co., ltd also developed several popular high end electric towel rack, the material is stainless steel, with multi-functions, like Drying, sterilization and disinfection.
Electric towel rack can quickly dry towels and clothes to avoid bacterial breeding. For example, clothes are not easy to dry in the rainy season. If there is an electric towel rack, they can be dried quickly. It is especially suitable for families with children. It usually takes only 1 hour to dry. Not only that, some electric Towel Racks can also raise the air temperature of the bathroom in winter, so that the bathing environment will not be too cold.
Electric Towel Rack,bath towel rack,towel rack shelf,towel rack warmer
Kaiping Yufa Sanitary Ware Co.,ltd , https://www.yufa-bathroom.com