Safety Operation Regulations of Offset Press: Safety Requirements for Electricity and Fire

The safety operation regulations of offset press mainly refer to the specifications and requirements related to the safety production of offset printing, including four aspects of fire safety, personal safety, equipment safety and quality safety.

3. Power and fire safety requirements


(1) Smoking is strictly prohibited within the factory area (except for designated smoking rooms and spots).
(2) Any unauthorized use of electric stoves and electric heaters is strictly prohibited on combustible objects such as wooden boards, tables and chairs, paper, etc., and people must disconnect the power supply.
(3) It is strictly forbidden to use paper, wood and combustible products as lampshades for the lighting lamps and light pipes used.
(4) It is strictly forbidden to use open fire, electric stove and smoking in bed in the collective dormitory in the factory.
(5) Machine. It is strictly forbidden to stack all waste paper of paper cutter near the power switch.
(6) All flammable chemicals with low flash point, such as gasoline, natural water, alcohol, benzene, etc., are strictly prohibited to be placed near motors, electric switches, and electric heaters.
(7) It is strictly forbidden to approach the fire source when receiving flammable and explosive materials with low flash point such as gasoline.
(8) In warehouses where flammable materials are stored, it is strictly forbidden to use fluorescent tubes and light bulbs of more than 100 watts.
(9) It is strictly forbidden to bring matches, lighters and all kinds of fires when entering oil depots and flammable and combustible chemical warehouses.
(10) It is strictly forbidden to enter the warehouses of various sizes without permission due to work.
(11) All shredded paper that has been packed must be stored in a designated place.
(12) The use of fire is strictly prohibited within the scope of the whole plant. In special circumstances, it is indeed necessary to produce fire due to production needs. Open flame for welding must be approved by the factory's security department or equipment section, and pay attention to the safety of fire.
(13) According to the regulations on the use of electrical equipment (electric stoves, electric fans, lighting, etc.), the principle of who is responsible for opening is responsible.
(14) For transportation of low flash points, flammable, explosive, and poisonous materials such as gasoline, natural water, alcohol, etc., drivers must strictly follow the relevant regulations to carry out precautions, carry fire extinguishers, and educate and urge porters not to be in the car Smoking and bumping, without causing due diligence to cause fires and fires, the driver will be held accountable according to the circumstances.
(15) Anyone who needs to enter the warehouse to submit the goods must abide by the safety and fire prevention regulations of the warehouse and obey the instructions of the warehouse manager. If the offender is in charge, the warehouse manager has the right not to accept, deliver and order him to leave the warehouse. The person should report to the leader in time.
(16) All raw materials (referring to flammable and explosive materials) in production workshops and departments should be established and collected in a timely manner, and the system should be used as received and used. The continuous production department should not exceed two days of production ( (The rest of the weekends and holidays must be returned to the warehouse or centralized storage).
(17) When loading and unloading flammable and explosive items, they must be handled lightly, and it is strictly forbidden to throw down or up on the car, at a high place, or let it slide on a springboard, collide with each other, or hit other things.
(18) It is necessary to use oil drums and tanks to pack flammable chemical items, which must not exceed safety standards, and must be reserved for 10-12 cm. It is strictly prohibited to fill up.
(19) Drivers and on-board staff of flammable and combustible materials are responsible for protecting the safety of cars and cargoes. When a fuel tank is found to be leaking oil and flammable and flammable liquids are leaking from the bucket plate of the car, the driver must stop Do not load or unload the engine with the vehicle, and it is strictly forbidden to enter all warehouses of all sizes and must be cleaned before operating.
(20) The storage, raw materials, glazing workshop and other workshops and departments are strictly forbidden to store flammable and explosive hazardous materials except for the production and usage.
(21) It is strictly forbidden to use electric heaters and roast clothes beside the oven.
(22) The electric heaters required for production should be supervised by people and kept away from all combustible materials. Electrical equipment should be regularly inspected to find problems and rectify in time.
(23) Combustible wastes in various workshops and production sites should be removed in time, and oily gauze, oily rags, etc. with oil should be concentrated in a safe place to avoid ignition and spontaneous combustion.
(24) Accessways, walkways, stairs, and other safe entrances and exits, and access to fire-fighting equipment and water sources should always be kept clear.
(25) When performing wind welding and electric welding operations, choose to carry out in a safe place, and keep oxygen cylinders and acetylene generators away from fire sources and high-voltage lines.
(26) According to the production situation, it is equipped with fire-fighting equipment suitable for the type and quantity, arranged in obvious and easy-to-access locations, and is frequently inspected and maintained, and is not allowed to be used for other purposes without authorization.
(27) It was found that the fire alarm quickly organized a rescue and immediately reported to the city fire brigade telephone "119".

Generally used in restaurants, cafes, hotels and other public eating places, can be used as advertising accessories to enhance the image. 

The colorful plastic coasters are added to the company and the corporate LOGO is more prominent, closer to people's lives, and the strong friction prevents the glass and porcelain cups from slipping.

It also protects the desktop from burns.

Coaster

Coaster For Drink, Drink Coaster Set, Coaster with Round Edge, Absorbent Coasters For Drinks

Liveon Industrial Co.,Ltd. , https://www.liveonkitchen.com