★ Large-format inkjet printing;
★ High-precision inkjet printing such as 8PASS;
★ computer computing speed is slow;
★ Computer's print port transmission speed is slow.
Solution suggestions:
★ screen saver, background is set to "none";
★ Change a print cable;
★ Select “Queue†in the bitmap image processing, wait for the computer RIP, and then send it;
★ If you can't wait, select "Transfer now" and wait until the computer RIP is about 15%. Then press the REMOTE button to connect.
★ Set the computer's print port to the ECP print port
The inkjet printer that supports the ECP print port is much faster than the inkjet printer that does not support the ECP printer port. The MIMAKI JV2-130 printer itself already supports the ECP function. Therefore, if the above phenomenon occurs, please check whether the computer has been set to use the ECP print port. If it is not set, please perform the following method to set the operation; Now we will use the AWARD BIOS as an example to introduce the setting method; when the computer performs the hardware self-test Press the DEL key to enter the CMOS settings, enter the INTEGRATED PERIPHERALS function option, set the Parallel Port Mode to ECP (Note: must be pure ECP, not EPP, SPP or ECP/EPP), and finally save and build the BIOS settings, Afterwards, the computer will restart and the WINDOWS system will automatically detect the ECP print port and install drivers for it. At this time, you can use the high-speed transmission performance provided by the ECP print port.
★ Use IEEE 1284 double-shielded ECP cable (recommended, non-essential)
Long print cable lengths or poor quality can affect the accuracy of data transmission. Therefore, we recommend the use of IEEE 1284 double-shielded ECP cables that are less than 2 meters in length. In addition, when inkjet breaks, first check the looseness of the connectors at both ends of the print cable. At the same time, replacing other test cables to ensure that they can be used for replacement testing is also a common and effective method of detection.
★ Turn off the computer's automatic power management function. As the inkjet process takes a long time, most customers often let the computer automatically calculate and output without performing other operations during the inkjet process. If the power management function is enabled, the hard disk or CPU will be After a certain period of time, the movement stops automatically. This results in an illusion that the message transmission has actually terminated, but the software still displays the message. The method of turning off automatic power management is as follows:
a. Take the AWARD BIOS as an example to describe the setting method in the CMOS. Press the DEL key to enter the CMOS setting when the computer performs the hardware self-test. Enter the POWER MANAGEMENT SETUP function option, set the POWER MANAGEMENT to DISABLE, and then save and exit the BIOS settings.
b. Turn off the automatic power management function in the WINDOW98 system: Start> Settings> Control Panel> Power Management, and set "Turn off hard disk" and "Off monitor" to " Never."
★ Adjust some settings in PHOTOPRINT software:
Do the following: "Edit"> "Settings"> "Output Devices"> "Settings"> "Communication" and then adjust the value of "Not selected" to "120".
★ Some other notes:
Use genuine anti-virus software to detect whether there are computer viruses.
a. Check the remaining free space on your computer's C drive. Since raster image processing requires a large amount of hard disk space for temporary file placement, if the available space on the hard disk is exhausted and RIP is no longer possible, the printer will be interrupted. In general, each graphic The temporary file size required by the file is usually 3-4 times the size of the source file. Therefore, it is necessary to check whether the hard disk space is sufficient before performing large-format inkjet printing. (C drive at least 4G space)
c. Organize hard disk files often to eliminate disk fragmentation. Sometimes, although the remaining space of the hard disk is still enough for normal inkjet work, it often cannot be performed smoothly. This is mainly because the temporary files must be stored in the continuous space of the hard disk. If the files on the hard disk are too scattered or the disk fragments are too fragmented, the maximum There is not enough space available for continuous use. Therefore, it is recommended that you frequently delete or transfer unused or infrequent files to free up hard disk space. In addition, perform disk defragmentation as follows: Start> Programs> Accessories> System Tools> Disk Defragmenter, which usually organizes the C drive.
d. Close unnecessary applications and release system resources as much as possible. As too many unnecessary applications are opened, system resources are exhausted, and the normal connection between the computer and the inkjet printer may be damaged, which may result in the interruption of the inkjet. Therefore, it is recommended to restart the WINDOWS system before performing the large format inkjet work. Run PHOTOPRINT software for inkjet work. In addition, it is also a strong recommendation to delete the self-initiated program that is not necessary to run in the Start > Startup program group.
e. In the inkjet process, the Production Manager is placed at the head of all the running windows to ensure that the program can obtain as much system resources and CPU processing time as possible.
f. Check the work environment. Please check whether there are high-power electrical equipment such as air conditioners, refrigerators, etc. around the workplace. A strong electromagnetic field will interfere with the output of the inkjet printer. At the same time, do not make the inkjet printer and the high-power electrical equipment on the same power supply line, and In areas with unstable power supply, inkjet printers and computers are best equipped with an online uninterruptible power supply (UPS). Also, do not use the phone near the printer.
g. Make sure that the printer and the computer are well grounded. Static electricity can adversely affect signal transmission, so use a good three-phase power outlet and plug, and use a true ground wire.
h. Use high-quality, large-capacity memory. It is recommended to configure more than 128MB of memory, and it is best to 1
Milo series organic Dry Cat Food have trout flavor and three fresh flavor, they both have adult food and Kitten Food.Low fat is the characteristic. These Cat Food are suitable for all kinds of cat. The usage are: bright hair, remove hair ball, aid digestion, promote grow.
Our factory has been in this line for more than 15 years, we undertake OEM business, include food and package.
Bulk Dry Cat Food,Trout Cat Food,Fresh Cat Food,Diet Dry Cat Food
Hebei Maische Pet Food Co., Ltd. , http://www.petfoodchina.com