The following eight points should be paid attention to during daily maintenance of the xenon lamp weathering test box

1. The xenon lamp weatherproof test box should be kept clean at any time. When the outer box is clean, you can apply a little varnish and polish it with a soft dry cloth. If it is too dirty, use neutral detergent and clean water to wash it. Never use it. Brushing powder, acid, benzene oil or hot water to wipe the inside and outside of the machine, the back or the walls are most likely to be covered with dust, and the heat dissipation of the condenser should be kept from time to time.

2. If the model is water-cooled, special attention should be paid to the water quality treatment, and the use of groundwater should be avoided as much as possible. Because groundwater contains more minerals, it is easy to produce scale, which affects the cooling effect and reduces the life of the machine.

3. Please use a special switch for the power switch. Do not use the cord with the sw plug in common with other electrical machinery. Do not place it on the floor or in a humid place to avoid stepping on or leakage.

4. An auto-transformer should be installed where the power supply voltage is too low to increase the voltage to the rated value, so as not to start the compressor motor because the voltage is too low to start.

5. During the test, the operation door cannot be opened for a long time to avoid water dance in the box.

6. The xenon lamp weather-proof test box cannot be installed upside down, and must be placed on the floor horizontally, so that the operation door of the temperature test box can be opened easily, and the noise during mechanical operation is reduced.

mpoe20565765.JPG

7. There should be a good ventilation space behind the test box, so that the condenser can play the role of heat dissipation. And avoid direct sunlight, do not approach heating elements such as stoves, so as not to affect the freezing effect.

8. Although the internal and external materials of the test box are made of high-grade stainless steel, the place where the water is wet can easily cause the machine parts and the electronic control center to produce adverse effects and reduce efficiency, and should be avoided as much as possible.

99j Lace Front Wig

99J Lace Front Wig,99J Burgundy Deep Weave Bundles,Burgundy Deep Weave Bundles,99J Burgundy Lace Front Wigs

Xuchang KANAZI Hair Products Co., Ltd. , https://www.kanazihair.com