Details of color business cards in the printing process

BAIDU_CLB_fillSlot("858283");
In this era of business card flooding, at least one of the directors or managers is taken out at random, and some people have a lot of titles on their business cards, and they are dazzling. So it is not surprising that people have low trust in the business card itself. The reason is that the lack of credibility is of course the main cause, but the poor handling of the details of business card printing is also a very important factor, leading people to think of it as a liar at a glance. This article explains how to deal with these details from the perspective of color business card printing.

First, the design points

The color business card printing design is too complicated. On the contrary, the simple and simple business card design is often remembered at a glance, and it is very good. Under normal circumstances, the background color should not be too much, at most two colors can be. Plus the company logo, no other design is needed. If the design of a single business card for general stencil printing is very simple, it is necessary to pay attention to the color registration problem.

Full-page printed business cards generally print ten business cards on a piece of paper. Note that the layout of the business card standard (55×90MM) should be 1MM spacing in the middle for cutting. The four corners are preferably angled for alignment. A vertical line is also required in the middle and up and down for the first crop.

If it is a business card produced by the company, you can do ten types of layout, position: horizontal 98mm, vertical 57.5mm to make 10 sets and then put 10 sets in the middle of the page, which is conducive to business card machine cutting. (Coreldraw9: Arrangement - Deformation, Coreldraw12: Arrange---Transform)

Second, the production content

The main function of the business card is to facilitate the contact of the other party, so the content must proceed from this basic function to reduce unnecessary interference factors. Under normal circumstances, the company logo, name and contact information, plus personal identity. Several factors must be matched. If the same person has different identities, such as one identity is the general manager of a company, another identity is a director of an association, and there are other multiple identities. In this case, it is not recommended to appear on a business card at the same time. It is a design of identity, a different business card on different occasions, and other identities can be introduced at the time of communication between the two parties.

Third, the production of materials

From the material point of view, color business card printing is mainly divided into paper, metal, electroplating, plastic, matte, PET, wood, mahogany, etc., but from the high-level exchanges, we noticed that the business card is out of its original function, to show off, often In the end, it is difficult to achieve their goals.

Therefore, the business card materials should be moderate, and it is not necessary to save too much to the point of making tricks. It is made of poor paper, and there is no need for luxury. Luxury business cards often show their lack of self-confidence.

Fourth, the production of finished products requirements

1. The standard specification of the business card is: 90×55MM. Pay attention to your cutting machine. If the standard is normal, you can cut the business card by 90X55MM. It is better to get smaller and smaller. It is possible that the best one is only 45MM. It is also possible, so it is best to set the size of the business card to 90 × 56 or 57MM to ensure bleeding.

2. When typesetting, pay attention to adding a cross or vertical short line of the printed output in the middle and middle, to ensure that the middle can be aligned when the cutting is divided into two. In addition, the four corners should also have a 90 degree symbol angle. The last time you cut the paper, you should align it. When cutting a single-sided business card, pay attention to one hand and press the middle position. The other hand is clean and cut. In addition, the general business card cutter can only cut 5 sheets or less. It is too thick and easy to take paper, and there is a burr. Pay attention to the finished product without teeth. .

3, double-sided business cards should pay special attention to the alignment of the positive and negative problems. Because for inkjet printers, the map you choose to print in the center is not necessarily the real center. The front side is going to play, the reverse side is going to be reversed, and you should pay attention to the margins. Try it several times according to your own printer. Fine-tune the bleeding and left and right margins in the print preview and then output. Generally, a box of business cards is ten sheets. Preparing eleven or twelve sheets and wasting one or two is inevitable. After you find out the rules, everything is much easier.

Wood Veneer Hollow Core Doors


Wood veneer hollow core doors are interior doors that feature a thin layer of wood veneer on the surface while having a hollow core construction. Here are some key points about these doors:

  1. Wood Veneer: Wood veneer is a thin slice of natural wood that is typically glued onto a core material to create the appearance of solid wood. The veneer can be made from various types of wood, such as oak, mahogany, walnut, or cherry. It provides an attractive and authentic wood grain look to the door.

  2. Hollow Core Construction: Unlike solid wood doors, which are made entirely of wood, hollow core doors have a lightweight construction with a hollow interior. The core is usually composed of a honeycomb-like cardboard or a grid of wooden strips. This design makes the door lighter, more affordable, and easier to handle during installation.

  3. Advantages: Wood veneer hollow core doors offer several advantages. They are more cost-effective compared to solid wood doors, making them a budget-friendly option. The hollow core construction also makes them lighter, which can be advantageous for ease of installation. Additionally, they have better sound insulation properties compared to completely hollow doors.

  4. Limitations: Hollow core doors have some limitations to consider. They are less durable and have reduced impact resistance compared to solid wood doors. They may also provide less insulation against temperature and sound compared to solid or solid-core doors. Furthermore, they typically cannot be trimmed or modified as easily as solid wood doors.

  5. Applications: Wood veneer hollow core doors are commonly used for interior applications where cost and weight are factors. They are suitable for residential homes, apartments, and commercial buildings. However, they are not recommended for high-traffic areas or places where security or privacy is a primary concern.



Wood Veneer Hollow Core Doors,Veneer Interior Doors,Wood Veneer Doors,Light Duty Hollow Core Wood Veneer Door

Ningbo Greenly Industy Co.,LTD. , https://www.chinagreenly.com