The peeling test machine is a high-performance mechanical testing device. The operation of various tests depends on the choice of the fixture. The following are the nine points for attention: 1. Regularly check whether the fixture is damaged. 2. Regularly check whether the pressure gauge is accurate. Hold the air pressure and oil pressure of the device. 3. If the clamping surface is worn, damaged or stained, the clamping surface should be replaced in time. 4. Do not use more than necessary clamping force, as long as it can provide reliable, non-sliding fixation. 5. The sample clamped in the fixture should always be glued to the load sensor 6. Preheat the load sensor for at least 15min 7. Once the sample is clamped in place, do not change the balance or beam position control point 8. Use the load The protection function protects the sample from damage. 9. If the sample load is less than 2% of the range, please consider using a smaller load sensor instead. In addition to the above precautions, the environment should be kept clean and dry in daily work. Regularly clean the fixtures and use the lubricant recommended by the manufacturer to lubricate the relevant parts with the correct grade of lubricant to reduce the damage of the clamping parts and ensure that the clamping work is normal. To ensure the accuracy of the test results.
Curtain Rod Aluminum Finial,Aluminum Curtain Rod,Aluminium Curtain Rod,Curtain Aluminium Rod
HANGZHOU AG MACHINERY CO.,LTD , https://www.famourdecor.com