[ Chinese wardrobe net ] [Chinese wardrobe net ] custom wardrobe sheet when buying, the quality of the board directly affects the final quality effect of the custom closet. So how do we judge the quality of custom-made wardrobe panels? Here, the China Wardrobe Network teaches you a few points.
Judging the quality of custom wardrobe panels
Different grades, plates are also different
Generally, the cut surface of the sample is seen. From the cut surface, the blockboard is two or four layers of upper and lower boards (also thickened using four or more single boards) close to the solid wood core, the quality of the fine board. The core cut surface is flat and there is no gap; the MDF is pressed by fine fibers, the combination is relatively tight and the weight is relatively large; the particle board is a wooden granular structure, but the combination is not tight enough, the weight is light, and the quality is poor. There are small pores; the multi-layer board is made of a plurality of veneers, generally three or five layers.
Judging the quality of custom wardrobe panels
Look for environmentally friendly plates
Professional custom wardrobe manufacturers use environmentally friendly panels that meet national testing standards, while some manufacturers use inferior panels that have no test reports and pose a potential threat to human health.
Therefore, to buy a custom closet should first look at whether the business has a plate inspection report and related test certificate from the national authority inspection department.
Judging the quality of custom wardrobe sheets
Plate veneer to see the quality
Some wardrobes look good on the surface, however, with a light stroke, you can draw obvious scratches. These custom-made wardrobes are made of surface-coated vellum paper or ornate paper sheets that are often used in low-cost wardrobes on the market, and have poor wear resistance. Professional custom closet manufacturers generally use environmentally friendly melamine veneer with thick thickness and high temperature and high pressure treatment, high surface strength, abrasion resistance and scratch resistance.
Judging the quality of custom wardrobe panels
Sheet edge sealing to see work
Professional custom-made wardrobe manufacturers use precision panel saws to cut sheets, and there is no chipping around the sheets. After the edges are sealed, the water in the air is effectively prevented from intruding into the interior of the board. Some manufacturers have no professional equipment, rough cutting, and obvious edge collapse around them.
Horizontal L type Wind Turbine
This SL type wind turbine is horizontal axis, like a windmill, with PMG generator. This L type wind turbine is for home use, power range is 1KW ~ 5KW, also could match up with solar panels to make a whole energy system. The blade length could be 1.25m ~ 1.95m, not very big, so you can use it near your house, on your farm, etc.
Horizontal Wind Turbine, Wind mill, Wind generators
Wuxi Smaraad New Energy Technology Co., Ltd. , https://www.smaraadenergy.com