High-grade log furniture identification method
First, verify that the solid wood judges whether it is a mystery of high-grade wood furniture: wood grain and thrift.
For example, if a cabinet door looks like a pattern, then the position corresponding to this pattern change, and the corresponding pattern is seen on the back of the cabinet door, if the correspondence is very good.
In addition, watching thrift is also a good way to identify high-grade log furniture: optimistic about the location of the scar side, and then find the corresponding pattern on the other side.
Second, judging tree species This is a factor that directly affects the price and quality of high-grade log furniture.
Ordinary solid wood furniture usually uses eucalyptus, ash, wood, eucalyptus, eucalyptus, rubber wood, eucalyptus, while high-grade wood furniture mainly uses rosewood, wenge, rosewood, red oak, teak, and so on.
Why are some furniture called pure wood furniture? Because the market for solid wood furniture is confusing, there are often things that are shoddy and confusing trees. Therefore, in order to distinguish them from those that are confusing, some brands simply sell high-quality wood furniture, which is sub-charged. If you are good, you can't say that you are high-grade wood furniture. At the same time, you should pay attention to the fact that the price of wood is rising day by day, and it is absolutely cheap to be too cheap.
Third, observe the wood to open the furniture cabinet door, drawer, observe whether the wood is dry, white, whether the texture is tight and delicate. If you have furniture made of materials such as particle board, MDF and one-time forming board, open the door or drawer and smell it for a pungent smell.
4. Look for the main force-receiving parts of the defective furniture, such as the column and the load-bearing horizontal strip connecting the column to the ground. There should be no large knots or cracks. The structure is firm, the frame must not be loose, and it is not allowed to break or break the material.
V. Inspection strength The strength of the board surface can be pressed with a finger to feel the firmness of the board surface. One side of the material should have a well-shaped skeleton to fix. If the skeleton is sparse, the surface will feel empty and false, and the panel will vibrate greatly; the bottom of the drawer should be pressed by hand to test the strength.
Sixth, safety performance to observe whether there is a drawer or door frame tilt phenomenon, whether there is a slanting of the eye position caused by the twisted eye socket or the eye hole is too large, the hoe is not strict.
The material should be safe and stable. When the two doors are opened 90 degrees, the hand should be gently pulled forward, and the cabinet should not be tilted forward automatically; the glass of the bookcase door should be polished and polished; the mirror and The dressing table should be equipped with a back panel, and the bead should be fixed to the glass surface. Individual parts of the furniture (such as legs, drawers, doors or brackets) must have sufficient support. You can push the top corner of the furniture or sit on one side and try to make sure the furniture is firm.
7. Check the furniture with heavy interface. Add the protective block with screws in the corner position and stick it. As for the back plate part, it is also necessary to check whether it is set and the screws are attached.
Eight, the test slide drawer should be strong and firm, tighten the screws inside. It is a good idea to open the drawers, the event table, the doors and other parts to see if they are safe to use and connect properly.
Nine, touch the surface and put your hand on the surface of the furniture, carefully check whether the polished surface is smooth, especially if the table legs and other parts are rough, whether the paint is streaked, whether the pigment in the corner is too thick, whether there is crack Or bubbles.
When the panel is covered with thin wood and other materials, the color of the product should be similar, and the paint film on the surface of the product is not allowed to wrinkle, stick and leak paint.
X. The “Inverted†test turns the chair and the furniture with the cushions upside down to see how they are made.
As for the table, check from the bottom. See if the seams are reinforced with screws and wedges, and the slats are fastened to the crosspieces? There are no excess glue and filler in the seams.
Know more about the product before you buy, which will help you choose a good product. The above is the detailed content of the high-grade log furniture identification methods and product details explained by Xiaobian today.
Lighted Globes,Illuminated Globe,Light Up Globe On Stand,Children'S Illuminated Globe
Ningbo Holly Arts & Crafts Co.,Ltd. , https://www.china-globes.com