Test principle: The human ELISA kit is a solid-phase sandwich enzyme-linked immunosorbent assay (ELISA). Standards with known IL-18 concentrations and samples with unknown concentrations are added to microwell enzyme plates for detection. Incubate IL-18 and biotin-labeled antibody first. After washing, HRP labeled with avidin was added. After incubation and washing, the unbound enzyme conjugate is removed, and then substrates A and B are added to act simultaneously with the enzyme conjugate. Produce colors. The color depth is proportional to the concentration of IL-18 in the sample. Test principle: The human ELISA kit is a solid-phase sandwich enzyme-linked immunosorbent assay (ELISA). Standards with known IL-18 concentrations and samples with unknown concentrations are added to microwell enzyme plates for detection. Incubate IL-18 and biotin-labeled antibody first. After washing, HRP labeled with avidin was added. After incubation and washing, the unbound enzyme conjugate is removed, and then substrates A and B are added to act simultaneously with the enzyme conjugate. Produce colors. The color depth is proportional to the concentration of IL-18 in the sample. Dilution of washing buffer (50 ×): 50-fold dilution with distilled water. Before use, mix all reagents thoroughly. Don't make the liquid generate a lot of foam, so as to avoid adding a large number of bubbles during sample addition, which will cause errors in sample addition. The number of slats required is determined by the number of samples to be tested plus the number of standard products. It is recommended to make multiple holes for each standard and blank hole. Each sample is determined according to its own quantity, and those that can use multiple holes can be used as much as possible. Add 50ul of the diluted standard to the reaction well and 50ul of the sample to be tested in the reaction well. Immediately add 50ul of biotin-labeled antibody. Cover the membrane plate, gently shake and mix, and incubate at 37 ° C for 1 hour. Shake off the liquid in the wells, fill each well with washing liquid, shake for 30 seconds, shake off the washing liquid, pat dry with absorbent paper. Repeat this operation 3 times. If washing with a plate washer, the number of washes is increased once. Add 80 ul of streptavidin-HRP to each well, gently shake and mix, and incubate at 37 ° C for 30 minutes. Shake off the liquid in the wells, fill each well with washing liquid, shake for 30 seconds, shake off the washing liquid, pat dry with absorbent paper. Repeat this operation 3 times. If washing with a plate washer, the number of washes is increased once. Add 50ul of substrate A and B to each well, mix gently by shaking, and incubate at 37 ° C for 10 minutes. Avoid light. Remove the enzyme labeling plate and quickly add 50ul of stop solution. After adding the stop solution, the results should be measured immediately. The OD value of each well was measured at a wavelength of 450 nm in the human ELISA kit.
Laminated Packaging Film is a type of rolls who suit for the automatic sealing machine(Form-Fill-Seal Machine). We supply in much different structure, different size and different thickness for different products. The maximum width of our packaging films can be 1250mm.Print up to 12 colors. Need any quote or advice for roll film,please just contact us.Thanks!
Laminated Packaging Film
Packaging Roll,PE Roll Film,Clear Roll Stock Film,Plastic Roll Stock Film
ZHEJIANG GONFOR SOFT-PACKAGE CO.,LTD , https://www.chinasoftpackage.com