The composition of waterless offset printing ink is similar to that of general offset printing ink, which is composed of pigment, resin binder, solvent and thinner, slope material and auxiliary agent.
Waterless offset printing ink refers to offset printing ink that does not use dampening water when printing. The graphic part of the printing plate is aluminum, and the non-graphic part is silicon rubber. This type of ink has high cohesion, so only the ink film in the graphic part will split and transfer. In the non-graphic part, because the adhesion is relatively small, it is impossible to overcome the cohesive force of the ink, so no ink transfer will occur. Due to the high viscosity of the ink, it is prone to the disadvantages of paper pulling and sticking. After the temperature of the ink and the printing plate is increased, it is also easy to cause scumming.
Offset printing without dampening water is a major reform of lithography. Because water is not used during printing, many printing failures caused by water during the printing process, such as: scumming (formed by washing out the pigment in the ink), deinking roller, thickening, no ink, Slow drying, incomplete dots on the printed product, insufficient ink color, not bright, low gloss, poor conjunctival strength, etc., because it disappears naturally without water. Because there is no water, the printed product will not be curled, and the printing waste and running waste are also significantly reduced. Obviously, the printed products printed with waterless offset printing ink have the advantages of bright colors, large gloss, fast drying and complete dots.
The binder for waterless offset printing inks consists of chlorinated rubber dispersed in dibutyl phthalate or dioctyl ester and dimerized rosin pentaerythritol ester dispersed in ink oil. To adjust its viscosity with ink oil, talc powder is often used as filler, in order to reduce friction, a small amount of polysiloxane can also be added to achieve the purpose of eliminating and reducing surface tension.
The DOING Inflatable Couch uses environmentally friendly PVC as a raw material, and gas enters through pressurization. Compared with traditional furniture, the Air Couch can be placed indoors and outdoors, so it is welcomed by many young people who pursue quality of life.
â— The inflatable sofa is small after deflation, and it is very convenient to store and carry, trendy and comfortable.
â— Blow Up Couch air bag with three-dimensional liner. Based on the pressure of different parts of the body, it can actively adjust the supporting force.
â— We support customization to meet your specific needs.
Inflatable Couch,Inflatable Sofa,Blow Up Couch,Inflatable Sofa Bed,Air Couch,Inflatable Chair
Danyang Doing Articles Co.,Ltd , https://www.dydoing.com