How can custom furniture get rid of the same thing?
For example, the closet, in addition to the color is not the same, the door is two push-pull left and right, the top is a hanging cabinet, even the depth is a uniform 600mm.
Like my friend A, who is 1.9m tall and weighs 190kg. When the clothes are hung up and hung in, they can't close the door. Finally, his clothes can only be stacked.
My friend B is 1.55m tall, and the hand is not enough to reach the deepest part of the wardrobe. In the end, it does not put clothes and wastes a lot of space.
In fact, the real good house customization should be designed according to our daily life habits and needs.
The length of each partition, the height of each cabinet, and the depth of each wardrobe should be reached out, the maximum efficiency of space utilization, and a reasonable moving path. The final result should be very consistent with the owner's personality habits, and the furniture should adapt to people's lives.
Rather than the other way around, everyone is bothered to adapt to these standardized, streamlined, custom-made furniture.
So let me talk about it today, how to have a set of tailor-made furniture tailored to fit the habits of life.
First, select the right suppliers and designers
A relatively simple way to filter suppliers is to look at their custom furniture software.
Try to choose a supplier that can produce 3D renderings. You can see if your chosen color and material are really beautiful as you imagined.
For example, the larger manufacturers use basically the round side software (this software company later made its own custom furniture, which is the famous Shangpin house). The effect picture is basically the real scene map:
The slightly worse manufacturers may use the sketch master's general rendering software, but it's good to see how many drawers have a few doors, and the general color number or something.
If you encounter a company with only black and white 2D sketches, be sure to choose carefully, for the following reasons:
My experience talks: Customization must produce a rendering! It's not a simple black and white drawing, it's an effect picture with the color of your choice! The cabinet of my bedroom was chosen to be a beige, especially after a large area! It’s totally different from what you think!
There is also a simple way for designers to distinguish between good and bad: before a good designer goes to your size, I will spend two or three hours talking to you about how old your baby is, whether your storage space is enough, etc. Wait, learn about the living habits and housing needs of your family members.
If he does not say the beginning and the size of the engineer as soon as he enters the door, you can say "Yes, no problem, especially good-looking!"
Second, deep understanding of their needs
In general, the designers of custom furniture manufacturers are not as professional as you think, and they are all...newbies.
As Ma Youyou "Ding Ding" said, the best designer is your own. It is a positive solution to understand your needs in depth and then actively feed back the data to the designer.
Know your shoulder width, leg length and height
wardrobe
The general designer, if you don't ask for it, he will extract the model directly from the product library, and change the size at random. That's why my friend's closet is 600mm deep, because that's the standard size of the wardrobe.
I have calculated, for the sliding door, your shoulder width +10cm should be a suitable custom wardrobe depth. Too narrow clothes can't get in, too much space is wasted.
cupboard
The default standard height of the kitchen console is 83cm, which is determined by the average height of China, but you have to customize the whole house, and you must come to a console that belongs to your own height.
There is a formula here, you can do it according to the calculation:
H=height/2+5~10cm
There is a small detail in the cabinet, which is actually four short feet below the cabinet:
For the sake of beauty and moisture, here is the baseboard:
Generally, the default size of this baseboard is 5cm deep and 8cm high.
If your feet are particularly large, you can adjust them to 7cm deep and 9cm high, but it is not recommended to do too high, otherwise it will affect the storage space of the cabinet.
desk
Generally, if you don't ask for it, the standard height of the desk is 74cm in the designer's model library.
But everyone's height is different, and different people have different requirements for the table. Do you usually use it to read books or draw pictures? Is it used for engineering drawings or for painting watercolors? Do you like standing, sitting or half lying down?
Different requirements correspond to different table heights, so you must think about what this table will do in the future.
I know that you usually use it to put a computer, chase a play / play a game / take a license plate, so here is a more convenient sitting height measurement method.
Find the most comfortable stool you usually sit with your legs open and shoulder width, your knees bent 90 degrees, the elbows are attached to your body, and the arm is bent 90 degrees horizontally. The height between your elbow joint and the ground is Suitable for your desktop height:
Know your own folding habits
Most wardrobes have too much hanging storage space and too few shelves or drawers.
You should look at your own folding habits, usually like to hang up your clothes, or stack them up, or... just put them in a group.
If the storage habits of the shirts are neatly stacked, then your wardrobe should be made with some narrower partitions for easy storage:
If you like to put it in, you can do more drawer drawers, even if you mess up again, you can find it in one second:
Count the number of clothes and shoes
Before you customize a wardrobe shoe cabinet, you must first do a big project to know what kind of internal layout you need.
Take out all your clothes, count a few tops, trousers, and long coats; take out the shoes and count the number of booties and boots.
The clothes that need to be hung up determine the length and height of your clothes rail.
The height of the clothes rail is average, the standard jacket height is 1 m, the standard windbreaker height is 1.4 m, and the standard trousers height is 1.2 m. However, if your leg length is 1.8m, remember to widen the trousers and partitions.
There is a formula for the length of the clothes pole, that is, the number of clothes that need to be hung up is X0.4cm (this value is variable, depending on the normal gap width you are used to hanging clothes), and the value obtained is the total length of the clothes rail that suits you.
The size of the shoe is also the same. In general, the width of each pair of shoes should be 30cm. The height of each shoe cabinet depends on the height of your shoes.
How much is your book?
If you have a small number of books, you can satisfy the demand by buying a book. Don't spend money on custom-made empty bookcases.
If you have a lot of books, it is best to look at the clothes and shoes mentioned above, and see how many books you have and the height of the artwork you want to put on the bookshelf.
For example, the bookshelf with the average score is not reasonable from the perspective of space use, and a small book is placed in the large grid, which wastes a lot of space.
The well-designed bookcases should be customized as needed. The position of each book, each painting, and each artwork is reserved in advance, maximizing space utilization.
It should be remembered here that if it is a planer to make a bookcase, it should use a plate with a thickness of 25mm or more, and the length should not exceed 60cm, otherwise it will bend.
The solid wood bookcase will be dedicated to the third furniture custom post, and will not be discussed here.
Third, know some reasonable and practical design
Let's take a look at some of the design ideas that individuals think are more reasonable and use. You can take a look.
Wardrobe retractable ironing board
The telescopic ironing board I saw in the European exhibition hall suddenly became a model for saving people's space and saving space:
Wardrobe corner
As mentioned above, if the drawings from the cabinet manufacturers you are looking for are two-dimensional black and white sketches, it happens that the wardrobe has a corner. If you don't pay attention, it is easy to make this look:
The corner is not a problem from the quality of the wardrobe itself, but the space utilization inside it is reduced.
A good corner wardrobe should be a check mark, smooth over to the opposite wardrobe.
If the budget is a little higher, you can make a spiral hanger to make it easier to take clothes.
Wardrobe shoe cabinet made of movable partition
Under normal circumstances, the partitions of the custom closet shoe cabinets are fixed, because more punching will be more labor-intensive.
Therefore, it is best to coordinate with the manufacturer. Make a hole every 3cm on the board. With the increase of things at home, you can move the position of the partition more conveniently:
Visibility design
Do more visual storage. It is more convenient to use socks, ties and underwear, and even shoes in the closet.
Built-in wardrobe induction lamp
This kind of induction lamp can instantly improve the sense of high quality of the wardrobe, and it can be seen more clearly when looking for clothes. It is more suitable for the wardrobe of the elderly.
The bed can be made into a locker
If you have a lot of quilts or other sundries, you can consider making the bed into a storage cabinet. When you pick it up, you can put a quilt and other things, especially easy to use.
Fourth, pay attention to the contract and post-installation
Don't think that you have designed your own needs, you can get a perfect whole house customization. Like air conditioners, custom furniture is also designed with three points and seven points.
For example, if ten houses are nine oblique, the wall of your home will not be exactly 90 degrees in verticality. For example, in the home of Ma Youyou, the wall is slanted, and finally the gap is filled with glass glue.
During the renovation, I found a custom-made cabinet and a cabinet. In the early stage, the designer did not consider that the wall of the cabinet was a little oblique. At the end of the installation, a diagonal seam on the right side of the cabinet was used, from large to small, and the widest part was nearly 1cm. Finally, you can only use glass glue to make up the seam!
In fact, due to the poor verticality of the house, the backboard gap caused by the tilting of the wall, a good decoration master will help you set a piece of wood. Then, according to the angle of your home, cut the board into a wedge shape, insert it into the gap, and then nail the back panel of the cabinet to the board to seamlessly connect with your wall.
The master who asks for himself a little higher will make the board look like a Roman column, or put on the edge banding. Basically, it is not a seam.
Later installations will also cause people to run into drawers that are not aligned.
The gap between the cabinet doors is too large
These are actually determined by the level of the master and the level of care. For this kind of post-installation service problem, there is a better solution, which is provided by Ma Youyou.
The exclusive secret is to have a good relationship with the designer of the scale. On the day of installation, the chefs must be present. Listen to me, it’s right! Spend a small amount of money and make a big profit.
Finally, it is also important to note that the sales of custom furniture are generally not very good in mathematics.
Rechargeable Sonic Electric Toothbrush
Rechargeable Sonic Electric Toothbrush,Adult Electric Toothbrush,Portable Household Electric Toothbrush,Special Sonic Electric Toothbrush
ZHEJIANG SHENGFA ELECTRIC APPLIAMNCES CO.,LTD , https://www.shengfa-appliance.com