Solid wood furniture has always been the darling of the furniture industry. It has the advantages of natural environmental protection, sturdiness and durability. It can be a beautiful and practical work with careful manufacture of good materials, but now many consumers can't tell the difference between solid wood furniture and general panel furniture. It is also unclear how to buy good solid wood furniture with real quality. How to buy solid wood furniture? Xiaobian teaches you a few strokes to easily choose solid wood furniture!
How to tell if it is solid wood
A mystery to determine whether solid wood furniture is: wood grain and knots. For example, if a cabinet door looks like a pattern, then the corresponding pattern of the pattern changes, and the corresponding pattern is seen on the back of the cabinet door. If the correspondence is good, it is a pure solid wood cabinet door. Also look at the knot is also a good way to identify pure wood: optimistic about the location of the scar side, and then find the corresponding pattern on the other side.
What are the common solid wood materials?
What kind of wood is made of wood, which directly affects price and quality. From the cheapest pine, eucalyptus, to expensive mahogany, the price difference is dozens of times.
Ordinary solid wood furniture usually uses eucalyptus, white oak, ash, eucalyptus, eucalyptus, rubber wood, eucalyptus, while the valuable mahogany furniture mainly uses rosewood, wenge, rosewood. The market for solid wood furniture is confusing, and there are often things that are shoddy and confusing, and it is best to buy branded products.
How to distinguish the quality of solid wood
Open the furniture cabinet door and drawers and observe whether the wood is dry and white, and the texture is tight and delicate. If you have furniture made of materials such as particle board, MDF and one-time forming board, open the door or drawer and smell it for a pungent smell.
The main stress-bearing parts of the furniture, such as the column and the load-bearing horizontal strip connecting the column to the ground, should not have large knots or cracks or cracks. The structure is firm, the frame must not be loose, and it is not allowed to break or break the material. The components of the wood-based panels used in the furniture shall be edge-sealed, and the various accessories shall be installed with few pieces, missing nails and nails.
The surface of the board can be pressed with a finger to feel the fastness of the board. One side of the material should have a well-shaped skeleton to fix. If the skeleton is sparse, the surface will feel empty and false, and the panel will vibrate greatly. The bottom of the drawer should be pressed by hand to test the strength. Generally, the bottom of the partition is multi-layered with a large area. The partition should be made of five-layer board. Cabinet doors and drawer switches should be flexible. When the panel is covered with thin wood and other materials, the color of the product should be similar, and the paint film on the surface of the product is not allowed to wrinkle, stick and leak paint.
Check stability and safety
Observe the presence or absence of the drawer or the door frame tilting phenomenon, whether there is a skew of the eye caused by the twisted eye position or the eye hole is too large, and the hoe is not strict. Wooden furniture should have safety and stability. When the two doors are opened 90 degrees, the hand can be gently pulled forward, the cabinet can not be tilted forward automatically; the glass of the bookcase door should be edging; the mirror and The dressing table should be equipped with a back panel, and the bead should be fixed to the glass surface. Individual parts of the furniture (such as legs, drawers, doors or brackets) must be supported. You should push the top corner of the furniture or sit on one side and try to make sure the furniture is firm.
It is advisable to purchase the dovetail joint or the butterfly joint. In the place where the partial load is relatively large, it is also reinforced by screws and protective blocks. As for the back plate part, it is also necessary to check whether it is set and the screws are attached. The drawer should be solid and secure with the screws tightened inside. It is a good idea to open the drawers, the event table, the doors and other parts to ensure that they can be used freely and properly connected.
Check if the surface is smooth
Place your hand on the surface of the furniture and carefully check whether the polished surface is smooth. In particular, avoid the roughness of the table legs, whether the paint is streaked, whether the pigment in the corner is too thick, and whether there are cracks or bubbles.
Turn the chair upside down on the furniture and look at how they are made. As for the table, check from the bottom. See if the seams are reinforced with screws and wedges? Is the strip and the buckle fastened? There are no excess glue and filler in the seams.
dishwasher safe, lightweight, top rack, easy to clean
chip resistant, for all serving usage of indoor and outdoor
durable , BPA free
vintage
we are the manufactuer that speically produce melamine and plastic products
the factory has Walmart, BSCI and Tchibo audit
our proudcts can pass EU NEW STANDARDS, LFGB AND FDA
we have our own lab
will do the test for each shipment to make sure all the goods are safety.
Melamine Dinnerware Set,Melamine Plates,Melamine Dinner Set,Melamine Dinnerware
TAIZHOU SHALL HOUSEWARE MANUFACTURING INC. , https://www.shall-melamine.com