In fact, the most worrying thing in the office is that the copier used has been faulty, and sometimes I can't find the reason. I don't know if some of the functions caused by improper operation are obstacles, the company can only spend Time spent energy to ask people to repair, sometimes we may not complete the customer's request on time due to the failure of the copier, resulting in the termination of the contract with the customer, then how can we see that the copier is caused by improper operation of our own?
It is common that the image that appears after we turn on the copy is not as clear as the original image, or the image is not clear, or the image is too dark. Then the fault of this kind is mainly because we will use the copier without preheating it. Because the heat of the photoconductor inside the copier has not reached the optimal temperature range, the resulting image density will be different. If you wait until the temperature of the photoconductor is normal, then there is a possibility that the drum temperature detector has a problem and you need to further repair the drum temperature detector.
If we stop using the copier for too long, it will take some time to use the copier again, not because of any malfunction of the machine, but because most of the copiers we purchased have power saving functions, so once If your standby time is too long, the copier will automatically turn off the power, you need to reboot and charge to copy. Of course, this does not mean that all copiers are like this. Some copiers can be restored as soon as they are pressed by any key.
Sometimes when we copy some originals with more colors, we will find that the color density of the copies is different. Some colors are very bright, and some colors are slightly grayish, mainly because of the sensitivity of different copiers to the color of the original. Some copiers are sensitive to a certain color, and some copiers are less sensitive to this color.
We found that each time the copied document and the original were different. At this time we should consider adjusting the concentration inside the copier. It is recommended that you adjust the multi-color original repeatedly to ensure the best concentration.
When we have selected the zoomed column on the machine and immediately copy it, we will find that the copied image does not have the effect of zooming, and sometimes even causes the copier to crash. In fact, the copy machine we usually buy will take There is an automatic recovery function. If we use the time when the function is exceeded, the copier will automatically restore the initial state by default, causing downtime. Also note that some machines do not have an automatic recovery function, so we should clear this function after the operation, so as not to have the effect of scaling next time.
Also, the images we copy are sometimes white spots or unclear. The main reason for this is that we place the copier in a place that is too moist, the light conductor caused by the lack of air circulation, or the moisture of the copy paper.
These listed problems are all problems we often encounter. A large part of the reason is because we did not follow the regulations in the process of operation, which will lead to some faults, so we usually use the copier. When you must remember, I will give you some points. I won't be overwhelmed when I encounter such problems.
Center Table And Side Table Set,Multifunctional Folding Coffee Table,Designer Center Table,Square Center Table
GuangDong Gelunya Furniture Manufacturing Co.,Ltd , https://www.gelunyafs.com