The mold incubator is generally used in medical and health, biopharmaceutical, agricultural scientific research, environmental protection and other research and application fields. It is a special equipment for water analysis, BOD determination, cultivation and preservation of bacteria, strains, microorganisms, plant cultivation, and breeding biological experiments. .
1. Use the adjusting screw at the bottom of the mold incubator to adjust the height to make the box stable.
2. Plug in the power socket (the power supply should be well grounded), press the power switch, the display is on, at this time the display shows the actual temperature and humidity inside the incubator.
3. Installation of the humidifier: insert the power plug of the humidifier into the power socket on the back of the instrument, and then connect the humidification tube of the instrument to the humidifier, and the connection must be tightly connected. The water in the humidifier water tank must be operated correctly according to the instructions.
4. Temperature adjustment: Press the temperature setting button, the digital display is the set value, rotate the temperature adjustment potentiometer to the desired temperature value, release the button, the digital display is the actual temperature in the cultivation chamber. At this time, if the actual temperature in the incubator is lower than the set temperature, the heating indicator lights, and the heater begins to heat; if the actual temperature in the incubator is higher than the set temperature, the cooling indicator lights, the refrigeration system starts to cool; if the heating indicator When both the cooling indicator and the indicator light are dimmed, the incubator is at a constant temperature.
5. Humidity adjustment: press the humidity setting button, the digital display is the set value, rotate the humidity adjustment potentiometer to the required humidity value, release the button, the digital display is the actual humidity in the mold incubator. When the actual humidity in the cultivation room is smaller than the set humidity, the humidification humidifies the cultivation room and the humidification indicator lights; when the actual humidity in the cultivation room is greater than the set humidity value, the humidifier stops working at this time and the humidification indicator Extinguish.
6. If there is no need for sterilization in the box, the sterilization switch on the panel should be set to the "off" position.
7. After the temperature is set, the temperature control knob cannot be rotated back and forth multiple times, so as to avoid frequent compressor startup, causing the compressor to overload and affect the life of the compressor.
8. Two sets of fuse boxes are installed on the back of the machine. 2A? Is the fuse box for cooling and heating load, and 8A? Is the fuse box for the control power supply. Check whether the fuse is intact, and then check the corresponding parts.
9. Care must be taken when handling, the angle with the horizontal plane should not be less than 45 °.
Snap Slim Light Box
FAQ
Q: Are you a trading company or factory?
A: We are factory.
Q: What is the MOQ?
A: No MOQ required normally, that means you can always ask for a sample first. But remember the sample freight is at your own cost.
Q: Do I have to have a design to inquire?
A: Yes! A well made design/artwork is the most helpful thing to get an exact quote. However, if you really do not have a design...just let us know your idea, we'll cover it.
Backlit Poster Holder,Beer Light Box,Advertising Light Box,Snap Slim Light Box
Chengdu GodShape Sign Co., Ltd , https://www.signsgs.com