First, before installation
1. When painting the wall, use a non-corrosive, non-melting waterproof material to cover the wooden door to prevent the paint from adhering to the surface of the product, causing peeling and fading, which affects the overall appearance.
2. The wooden door must first be placed horizontally on the ground before installation (the stacking height should not exceed 1 meter). Do not lean against it to avoid deformation.
3. Try to avoid long-term outdoor sunlight and prevent the wooden door from being heated.
4. Place in the drying room and keep the indoor air circulation to prevent the wooden door from getting wet.
5. Prevent wooden doors from being subjected to abnormal impact or contact with corrosive substances.
6. Before installation, the door hole must be subjected to the necessary moisture and corrosion protection.
Second, after installation
1. When using wooden doors, do not hang heavy objects on the door leaf or avoid sharp objects from bumping or scratching.
2. When opening or closing the door leaf, do not use too much force or the opening angle is too large to avoid damage.
3. When maintaining the wooden door with glass, be careful not to infiltrate the cleaning agent or water into the gap of the glass bead to avoid deformation of the bead. Do not use excessive force when wiping the glass to avoid damage to the glass and the human body. After the glass is damaged or there is a big bump, be sure to ask a professional maintenance person for repair.
4. When removing the stain on the surface of the wooden door, wipe it with a soft cotton cloth. It is easy to scratch the surface with a hard cloth. When the stain is too heavy, use a neutral detergent, toothpaste or special detergent for the furniture. Wipe immediately after the detergent. dry.
5. Pay attention to the neutral detergent or the cloth containing high moisture. Do not place it on the surface of the wooden door for a long time, otherwise it will invade the surface of the surface and make the surface discolored, aged or peeled off. 6. Do not touch hot objects to avoid damage.
7. Pay attention to the excessive friction between the corners of the wooden door, otherwise the edge paint will fall off.
8. When removing dust from wooden products, it is not convenient to use a soft cloth to remove the dust. In order to maintain the gloss and service life of the wooden door, it should be cleaned and dusted regularly.
9. In order to maintain the bright color of the wooden door, the furniture maintenance wax should be used regularly for maintenance.
10. When using wooden door products, try to keep the relative humidity of indoor air between 60% and 75%. In spring and winter, pay attention to indoor ventilation and keep indoor humidity so that the wooden door is under normal room temperature and humidity to prevent the product from getting wet. The temperature difference is too large and deformed, the metal fittings are rusted, the edge banding and the facing material fall off. When using electric heating or other heating equipment in winter, keep away from wood products to avoid thermal deformation or surface damage.
11. For hinges and locks, the accessories that are frequently active should be tightened in time when the looseness occurs. When the hinge position is sounded, the oil should be injected in time. When the lock is not flexible, add the appropriate amount of pencil core foam to the keyhole. Do not inject the lubricant.
12. When the wooden door edge is partially peeled off, it can be ironed by a dry cloth with an iron pad.
13. The reason for the yellowing of the white paint door should be said to be due to the oxidation of the paint film. Avoiding the yellowing of the white paint door is to prevent oxidation. It is the key to prevent oxidation and avoid direct sunlight exposure.
14. Due to the characteristics of dry shrinkage and swelling of wood, it is a normal natural phenomenon if there is a slight difference in temperature and humidity, such as slight cracking or shrinkage. This phenomenon will naturally disappear with seasonal changes. .
Customized metal products refer to metal products that are specifically designed and manufactured to meet the unique needs and requirements of individual customers. These products can be made from a variety of metals, including steel, aluminum, copper, brass, and titanium, and can be used in a wide range of applications, such as construction, automotive, aerospace, and electronics. Customized metal products can be fabricated using a variety of techniques, such as casting, forging, stamping, and machining, and can be finished with a range of surface treatments, including painting, plating, and powder coating. These products are often used in situations where standard off-the-shelf products are not suitable or do not meet the required specifications.
Customized Parts,CNC parts,Cup Turner,Cup Turner Tumbler
Dongguan Jiangxin Metal Products Co., Ltd , https://www.jiangxinbbq.com