According to survey data, the proportion of wood flooring selected by consumers in the city is as high as 81%, while laminate flooring and solid wood composite flooring are more favored, accounting for 31% of the total. At present, the floor is divided into four types of flooring: solid wood, solid wood composite, reinforced composite and bamboo, while wood and composite have different classifications. When consumers enter the building materials store, they will be plagued by hundreds of different types of floors. The sales staff will make every effort to promote the quality, price and service, and the publicity will make the majority of consumers feel at a loss. . Therefore, it is necessary to sort out the type of flooring, regardless of popularity, to choose the product that suits you.
4 types of floor price
Solid wood flooring is more expensive
Solid wood flooring is roughly divided into hardwood floors and cork flooring. The hardwood floor has the texture hard, fine texture, good wear resistance, elasticity, dryness, cleanliness, beautiful appearance, etc. The wood used is ash, birch, walnut, eucalyptus, sea eucalyptus and eucalyptus, etc. Some wood floors use cherry wood, longan wood, camphor, etc.; and cork flooring is mainly pine, fir, cedar, hemlock, etc. snow, cypress, warm, elastic. However, the wear resistance is poor, and if it is not dry enough, it is more likely to be deformed and cracked.
In general, although the solid wood flooring has the advantages of good foot feel, natural texture, good thermal insulation, etc., the hardness is slightly poor.
Large price difference of solid wood composite flooring
The parquet is divided into the following three types: three-layer solid wood composite flooring, which is made of three different kinds of wood. The surface layer is made of hardwood such as beech, birch, elm, cherry, and ash. The middle layer and the bottom layer are used. Soft wood, such as the core board with pine wood, the elasticity of the solid wood floor, and relatively reduced the cost.
The multi-layer solid wood composite floor is made of multi-layer plywood, and the surface layer is set with hardwood veneer, which is laminated by urea-formaldehyde resin.
The new solid wood composite floor has the same surface as the first type of hard wood. The middle layer and the bottom layer use medium density fiberboard or high density fiberboard, and the effect and durability are similar to those of the three-layer solid wood floor.
The floor wear resistance is between the laminate floor and the solid wood floor, and the hardness is lower than the laminate flooring and solid wood flooring.
The most affordable flooring price
The reinforced laminate flooring is composed of three layers of materials, the middle layer is density fiberboard, which has strong impact resistance and is not easy to be deformed; the bottom layer is a balance layer and acts as a moisture barrier; the surface layer is covered with a melamine wear layer on the printed decorative layer, and the abrasion resistance is far. Higher than wood, it has good flame retardancy and is anti-corrosive, moisture-proof and anti-mite.
Compared with the above two types of flooring, the surface of the laminate flooring can be printed with various wood grain and beautiful appearance. The paving is quick and easy, saving wood. But the elasticity is worse than solid wood flooring, and its biggest advantage is that the price is the cheapest.
Bamboo flooring cost-effective
The bamboo floor is a floor made of bamboo after being treated. It has the natural beauty of natural materials and the advantages of wear resistance, and it can prevent smashing and shock. Bamboo flooring is warm in winter and cool in summer, moisture-proof and wear-resistant, easy to use, especially to reduce the amount of wood used, to protect the environment.
Authoritative statement: reasonable pavement use is more worry-free
Today, when bottlenecks in floor innovation and product homogenization are becoming more serious, consumers should put more energy into the paving stage of the floor.
There has always been a saying in the flooring industry that the wooden floor is “three-point floor seven-packâ€, that is, the quality of the installation determines 70% of the floor quality. The unsatisfactory use of the floor is largely caused by the unevenness of the floor covering. The problem of floor covering has become the biggest problem that restricts the use of the floor.
To avoid unpleasant floor repairs, it is more important to do a good job in sales. The person in charge of Ruijia Floor told the reporter that before the installation, the staff must carry out four different aspects of measurement preparation. This has the advantage of greatly enhancing the accuracy and precision for the later construction process and effectively detecting the ground. The specific degree of the five major problems of "sand, tide, concave, convex, and crack".
In addition, the staff should carefully examine the three aspects of ground level, ground tightness and non-humidity on the ground.
Consumer Tips: Picking the floor to master the seven principles
Since wear resistance is not the most important indicator for buying flooring, how should consumers choose wooden flooring? Gao Zhihua, secretary general of China Flooring Alliance, gave seven suggestions for selecting flooring:
1. Laminate flooring should buy products with a certain reputation. The product must have the test report of the national authority, and the product packaging must have a complete identification.
2. Look at the wear resistance number. The wear resistance of the household floor is usually more than 4000 rpm, and it is usually more than 9000 rpm in public places. The decorative layer should be resistant to light.
3. Check the formaldehyde release limit. The amount of formaldehyde released in the laminate flooring is ≤1.5mg/L.
4. Look at the substrate density. The substrate density of the laminate flooring should be 0.84-0.9/cm3. The smoke density is too low or too high.
5. Look at water resistance. The index value is high, the water resistance is poor, and the dimensional change is easy to occur in a humid environment, and the water absorption thickness expansion rate should be ≤ 2.5%.
6. Look at the processing density. Observe whether the product is smooth and smooth, whether the gutter bite is suitable, should not be too loose, and should not be too tight.
7. Sales + paving + warranty. "Buy" and "shop" do not separate, reach the acceptance criteria for paving, and have a complete after-sales service guarantee.
Peripheral Devices and Consumables
Based on the low labor cost and reasonable stainless steel cost, Helper help to offer clients internal transport devices with best price. These machines and device include standard material truck, smoking trolley, lifter, conveyer belts, spiral feeding machine, hydraulic lifter etc. The internal transport device is used in filling and forming workshop, tumbling and seasoning workshop, smoking and cooking room etc.
Helper has a professional team to design and produce sausage clips. They have rich experience and understand all the key points for produce good quality clips. From the raw material purchasing to mould designing, from the QC in production to post-treatment, they pay attention to all these details that lead to the good quality of Helper`s clip series. Our clips products include U shape clips, Great wall shape clips, and aluminum wire (for aluminum wire clipper).
U Shape Sausage Clip,Clips On Strip,Bag Packaging Clips,Screw Material Conveyor
Helper Machinery Group Co., Ltd. , https://www.helpermeatmachine.com