》
There are new proofing devices on the market. There are four kinds of technologies that can be summarized as follows: silver salt, inkjet, thermal transfer, and electrophotography.
Silver salt works with light materials. This kind of device part can display outlets. The pigments of photographic materials match the inks, and most use luminescent photographic materials. This device does not require special environmental protection during normal color development.
In recent years, the ink jet method has been rapidly developed, and the resolution of the ink jet device has become higher and higher. From the current point of view, this method is the future proofing method. The use of the ink jet method enables good proofing to be achieved at a low cost, and any kind of printing material or paper can be used.
The thermal transfer method uses a heating method to separate the color layer from the support film and transfer it to the printing material. Both of these are very expensive on the market (more than 200,000 marks) and digital proofing with outlets is possible.
A few years ago, electrophotography was considered a promising proofing method. Manufacturers invested huge sums of money but quickly disappeared because the quality of this method depends in particular on the temperature and humidity of the room during proofing.
There are new proofing devices on the market. There are four kinds of technologies that can be summarized as follows: silver salt, inkjet, thermal transfer, and electrophotography.
Silver salt works with light materials. This kind of device part can display outlets. The pigments of photographic materials match the inks, and most use luminescent photographic materials. This device does not require special environmental protection during normal color development.
In recent years, the ink jet method has been rapidly developed, and the resolution of the ink jet device has become higher and higher. From the current point of view, this method is the future proofing method. The use of the ink jet method enables good proofing to be achieved at a low cost, and any kind of printing material or paper can be used.
The thermal transfer method uses a heating method to separate the color layer from the support film and transfer it to the printing material. Both of these are very expensive on the market (more than 200,000 marks) and digital proofing with outlets is possible.
A few years ago, electrophotography was considered a promising proofing method. Manufacturers invested huge sums of money but quickly disappeared because the quality of this method depends in particular on the temperature and humidity of the room during proofing.
Solid Wood Furniture,Solid Wood Office Furniture,Solid Wood Nightstand,Solid Wood Bedroom Furniture
Hebei Rukai Furniture Co. , Ltd. , https://www.wyrukaifurniture.com