What should I do with stone plastic floor care?

What should I do with the stone-plastic floor care? What should I pay attention to when laying the stone-plastic floor?

Due to its wear-resisting, non-slip, and multi-colored colors, the stone-plastic floor is widely used in public places. I don’t know if you noticed it. Some users have some problems when the stone-plastic floor is paved. Actually, Sometimes it is not a question of the quality of the stone-plastic floor, but when the stone-plastic floor is installed, there is no need to do the stone-plastic floor health care work. What should be done with the stone-plastic floor care? What should I pay attention to when laying the stone-plastic floor? Go and see it. .


Stone plastic floor health

Most of the paving problems were not caused by poor splicing, but because of the failure to maintain the stone-plastic floor before the paving.

1. Stone-plastic floor should be kept in stone-plastic floor for at least 48 hours before paving. Make sure the stone-plastic floor is adapted to the temperature and humidity on site. The stone-plastic floor packaging stack should not exceed 5 boxes and the stone-plastic floor should be removed 30 minutes before use. The room temperature should ideally be between 18 and 26 ° C, but more importantly the temperature change is relatively constant.

2. Since there may be extreme temperatures between day and night, this situation must be avoided. In order to minimize the temperature fluctuations in the daytime, the windows in the south and all the windows in the greenhouse must be shaded. If necessary, a thermostatically controlled heating system can be activated at night to achieve a constant temperature similar to that of the day.

3. Keep the temperature constant before paving, during paving, and at least 48 hours after paving.

What should I do with the stone-plastic floor care? What should I pay attention to when laying the stone-plastic floor?

Stone-plastic floor preparation

1. In order to obtain the best appearance, careful planning of the stone-plastic floor is required. Prepare the stone-plastic floor, preferably pre-sand the stone-plastic floor, to determine whether the appearance of the pattern is acceptable, and to ensure that the texture/texture of each stone-plastic floor is correct.

2. Generally speaking, the starting point of the stone-plastic floor covering is the center point of the room. Before working, you should first confirm that the overall appearance of the floor is acceptable. If the room is irregularly shaped, it may be necessary to place the stone-plastic floor from the most important wall or specific location.

3. In order to avoid the deviation of the paving, after the pre-planning preparation for the laying of the stone-plastic floor is completed, it is generally necessary to use the central reference line of the ink fountain door to be laid, and the pyramid can be laid out along the central reference line when laying. If there is a wall edge waveguide line edging, it is recommended that the waveguide line part be as wide and narrow as possible, and it is more beautiful after completion.

Therefore, when installing the stone-plastic floor, first of all, we must do a good job in the maintenance of stone-plastic floor. What should be done in the maintenance of stone-plastic floor? What should we pay attention to when laying the stone-plastic floor? The above is also introduced. These are must be installed before the stone-plastic floor installation. Noticed.

Living Room Furniture

Office furniture refers to a class of appliances that are indispensable for human beings to maintain normal life, engage in production practices and carry out social activities. It means that today's living room furniture design is actually designing a new way of life, work, leisure and entertainment.

Living Room Cabinet Tt Lc0 2

People pay attention to the coordination between the color of the living room furniture and the decoration of the room, and can reflect the owner's temperament and hobbies at the same time. Living room furniture tends to be simple, thin and practical, and some living room furniture is even made of cardboard. The product design uses the principle of mechanics to make the furniture with sufficient strength. At the same time, the surface of the furniture is coated with protective paint. After special treatment, the two weaknesses of pressure resistance and water resistance are solved, so that the paper furniture has a certain degree of moisture resistance, waterproof, anti-mildew, anti-moth and other functions.

Living Room Furniture,Living Room Storage,Living Room Furniture Sets,Modern Living Room Furniture

Jinan Tri-Tiger Technology Development Co., Ltd , https://www.tritigerwooden.com