The electronic scale has brought us a simple, fast, convenient and safe weighing service. Nowadays, in terms of weighing, we basically use electronic scales.
Therefore, we all know that electronic scales are electronic weighing devices that use modern sensor technology, electronic technology and computer technology. As a result, his charging problem is a problem that has to be taken seriously. Mastering the right knowledge of charging is not only convenient for our work, but also extends the life of the instrument. The following small series to introduce a little bit about the use of electronic scale chargers.
First, the three indication states of the charger
1. Hand-held display charging indication: When the under-voltage indicator on the hand-held display mark indicates that charging is required, please charge the meter as soon as possible. After the logo is illuminated, the meter can still be used for 15 minutes and automatically shut down after 15 minutes to protect the battery.
2, the charging method of the handheld display: charge the meter, please use the charger with the random, do not replace it with other power, otherwise it may damage the meter and the battery. It takes about 5~7 hours for the battery to fully charge. When fully charged, the smart charger will automatically switch to the turbulent state.
3. Under-voltage of the transmitter battery: When the handheld display is in the normal communication weighing process, the first digit from the left of the meter displays “Lâ€.充电 Charging the battery of the transmitter battery Insert the battery to be charged into the battery jack of the charger. The charger enters the charging state (see the charger for details). It takes about 5 to 7 hours for the battery to fully charge. When the battery is fully charged, the smart charger automatically switches to a turbulent state.
Second, battery safety matters
The device is powered by a rechargeable battery, please observe the following precautions:
1. The new battery will only achieve the best performance after two or three cycles of charging and discharging.
2. In order to maximize the service life of the NiMH battery, please charge the battery until it is under voltage.
3. Do not short the battery into the water. Short circuit will damage the battery.
4. Do not short the battery plug, otherwise please take it out every three months. Damage to batteries and shorts.
5. If the battery is not used for a long time, “On†means there is no data in the memory and cannot be cleared.
Dental Lab Plaster Model Trimmer
Dental Lab Trimmer,Dental Model Trimmer,Plaster Model Trimmer,Dental Plaster Model Trimmer
Henan Hanchen Medical Technology Co., LTD , https://www.hanchenyiliao.com