Reporter Yin Wei
During the renovation, many people will choose custom furniture, some choose professional custom furniture business, and some will be woodworking on-site production. There are many advantages of custom furniture, such as tight seams, reduced sanitary corners, increased storage space, and good integration with the home environment. However, once a problem occurs, it is more difficult to replace or repair it.
Recently, some citizens called to inquire: The custom-made wardrobes that have just been renovated in the house have serious cracks in the tops and ceilings of the cabinets. It seems that a big crack has been opened. What is going on?
In this regard, the reporter interviewed Ye Feilong, manager of Ruixin Decoration Engineering Department. He analyzed that in the renovation project, the most common common reasons for custom furniture and cracks on the wall are the following three.
Cause one measurement error
In general, custom furniture must be dimensioned before production to maximize the benefits of custom furniture.
However, some owners have measured the time too early, and have made door-to-door measurements when they have not been renovated, or halfway through the renovation, which is very prone to problems. For example, if the height is measured before the floor is laid, after the floor is laid, it may be found that the custom furniture cannot be stuffed into the space, or the installation is cracked because the height is squeezed.
Ye Feilong suggested that when customizing furniture, it is necessary to let the designer go to the door for measurement, and then measure the size after the hard work of the ground, wall and other materials. Custom furniture measurement data is accurate, and can also avoid the switch panel, the socket is blocked, etc., to minimize the loss of the owner and reduce regret.
Cause two uneven force
“If the custom furniture design is not scientific, there may be cracks.†Ye Feilong said, it doesn’t look like custom furniture looks simple. In fact, there are many doorways. How to design the cabinet to be scientifically stressed, how to arrange space Both the maximum storage space and the firmness... these are all carefully considered. If the custom furniture design is defective, it will lead to uneven force and gaps, misalignment and so on.
When choosing custom furniture, how do you try to avoid the "unreliable" design? Ye Feilong suggested that the first is to try to find a large manufacturer with good reputation and high evaluation. This kind of custom furniture has professional designers to check and produce production lines. Generally, there will be no big problems in design and quality control. Second, the industry is mainly Listening to the designer's professional advice, some owners like to design some shapes, such as punching holes in the glass, etc., may also affect the quality of custom furniture.
Reason 3 is not used properly
After the custom furniture is done, pay attention to the daily use. If it is used improperly, there will be quality problems such as cracks.
"Many people's furniture at home is very easy to use. After half a year of use, the furniture that has been stitched together will have a large gap, tilted left and right, etc. This may be of poor quality or may be related to the user's habits. "Ye Feilong said an example. For example, the sliding door of the sliding door wardrobe is easy to slide to one side, mostly because the clothes in the wardrobe are unevenly placed, and one side is light and one side is heavy; the gap between a certain drawer and the previous drawer becomes larger, which may be placed in the drawer. The weight of the bookcase is too much; the laminate of the bookcase is deformed and cracked, probably because the weight of the book exceeds the design weight of the bookcase and so on.
Different materials outdoor furniture
Maintenance has a trick
Reader Ms. Hong called the home club to consult, wanted to choose an outdoor furniture, visited the market, found that pe vine, wrought iron, anti-corrosion wood is a more mainstream product, but she wonders, which material is better to maintain?
According to members of the home club advisory group, different materials for outdoor furniture, maintenance methods are also different. For example, the petan outdoor furniture with rattan effect is more casual and practical, with the advantages of easy cleaning, anti-sun and rain, and no need to spend too much time on maintenance. Usually use a rag, soft brush to clean, pay attention to anti-collision, to avoid being scratched by hard objects.
Wrought iron furniture has the advantages of toughness, anti-insect, sun exposure and anti-collision. However, although the surface has been treated, it has been used for a long time, or improper maintenance, it will inevitably lead to rust, fading and so on. Therefore, regular maintenance with anti-rust oil can be used regularly to keep the furniture clean and new. Also avoid folding furniture, collision of joints, and avoid the use of furniture deformation.
Wooden outdoor furniture is mainly divided into anti-corrosion wood and solid wood furniture. The anticorrosive wood is infiltrated and cured with a preservative. It has anti-corrosion function and is a material specially designed for outdoor use. It is easy to take care of everyday, and wipe it with a rag. The solid wood mainly refers to tea wood, pine and other wood materials with good water resistance, and then sprayed with special protective paint for outdoor, to prevent cracking deformation and insects. Do not use hard objects to scratch, to avoid damage to the surface paint protection. Although it has been painted, but due to its solid wood characteristics, it is still necessary to avoid exposure and rain.
Buy furniture
No pungent smell
Not equal to no pollution
Ms. Zhao in the urban area: What kind of furniture is good to buy, is there no pungent smell is equal to no pollution?
The reporter visited the home market and learned that some custom furniture merchants will increase the publicity of the environmental protection of the plates during the sales process. The reporter learned that most of the custom furniture currently uses particle board and high density board. As for which of the two is more advantageous, the merchants have their own rhetoric, and the salesperson still recommends the environmentally friendly products to consumers without the pungent smell.
In a brand-customized furniture store, the reporter got a more pertinent answer. Liao Gong, who is engaged in custom furniture design, said: "From the custom furniture whether it has a pungent smell to judge whether the plate is environmentally friendly, it has certain reference value, but it is not scientific enough. In fact, consumers can look at the plate grade, see the certification, see Report to identify whether custom furniture panels meet environmental requirements. The formaldehyde emission of the panels is a certain standard. The current national standard for indoor custom furniture panels is e1, that is, the formaldehyde emission is 0.5mg/i~1.5. Mg/i; and the e0 level standard of formaldehyde emission less than 0.5mg/i is the European standard that will be adopted in China. This plate is the most environmentally friendly on the market, but the price is also more expensive. Any plate, if declared The environmental protection must have the 10th ring certification mark of the green building materials of the State Environmental Protection Administration. This is the main standard for measuring the scale, product quality and comprehensive strength of a customized furniture brand. Custom furniture requires the manufacturer to provide inspection reports of authoritative institutions at or above the provincial level. Therefore, the inspection report must be issued by the quality inspection department at the place of sale. In addition, the furniture must provide product specifications.
Bar Glasses
This category include cocktail glass
A cocktail glass is a stemmed glass with an inverted cone bowl, mainly used to serve straight-up cocktails. The term cocktail glass is often used interchangeably with martini glass, despite their differing slightly. Today, the glass is used to serve a variety of cocktails, such as the martini and its variations (French martini, vodka martini, espresso martini, appletini), Manhattan, Brandy Alexander, pisco sour, Negroni, cosmopolitan, gimlet, and the grasshopper.
We offer a diversity of glassware products mainly including many types of Drinkware , Wine Glasses, Glass Vase , Glass Plates/Dishes, Glass Candle Holder, Storage Jar , wood product, ceramic, Rattan Wrapped Glass, and lots of other popular glass products on the market. With numerous glassware available on our site in different color, shape, process and design, many of them can be customized
Bar Glasses,Crystal Mixing Glass,Bar Shot Glass,Specialty Cocktail Glasses
Shaanxi Freeway Export and Import Co.,LTD , https://www.fw-deco.com