Automatic Juice Bottling Packing Production Equipment

Full automatic PET bottle 3-in-1 juice beverage filling machine / juice filling machine
Juice machine filling machine working video website:
RCGF18-18-6 juice filling machine :http://youtu.be/jK18A8D_naY

RCGF 24-24-8 juice filling machine :https://youtu.be/3Q3OEQsgWJU
1) The juice beverage filling machine is mainly used for hot filling machine and sealing of green tea, black tea, and fruit juice drink.It can be used to fill pure water or mineral water or still water ,just need to lean the juice filling macine nozzle and pipes .
2) Adopt PLC as center controller, make use of pressure transmitter and electromagnetism pneumatic valve to measure liquid level, and keep balance of filling pressure to insure stable liquid level.
3) Adopt new type filling valves from jst mchinery which are especially designed for plastic bottles. The returned air and the liquid in filling tank are insulated to insure cleanliness of the filled beverages.4. Adopt advanced magnet clutches for capping with adjustable tensional moment to insure capping safely and reliably
 Rinser
Spring cramps are used in the bottle washing process. The empty bottles can be turned over 180° along the conveying rail. There are two times of internal and external washing, the efficiency of bottle washing is high.
Rinsing machine adopts JST machinery original overturn and double-opened bottle clip. Bottle clip lock the bottleneck, the material of bottle clip is SUS304, which is hygienic and durable.
Bottle clip equipped with efficient spray on nozzle. The extrusive droplet with 15° angleensures to wash all side of the bottle, and can save the water.
It is our new design ,all is stainless steel 304 ,the water connecting pipe is not the plastic pipes .

 
Filler(the following photos is for glass bottle juice filling )
Filling machinery design of filling structure is reasonable and hygiene dead angle, the run of equipment is stable, it can control the material from the bottleneck, the control accuracy is within ±2mm (subject to bottle design).The filling valve material is SUS304.The filling system has liquid level automatic control.Filling valve lift is controlled by the valve elevator, after filling valve contact the bottleneck,it starts to fill.Bottle is conveying by the wheel in the filling part.

Capper (the following photo is for crown cap )
Screw capping machine is most precision part in the 3-1 machine,it has a big influence to the goods stability and defective rate. our screw capping has following feature.
1)JST machinery import of advanced technology of screw capping,improve the stability and reliability of the screw capping machine. The magnetic torque is used for screw capping. Thepower of screw capping can be adjusted without steps. The power of the screw capping can also be fixed, and the caps will not be damaged, the capping is reliable.
2) In the screw capping part. it installed photoelectrical control , when it has no cap ,or the cap is bad, the machine will stop automatically.

Our Services
After you see all these details' photos ,why do you still hesitate not to contact us ?
 
We have strong after-sales service team forJuice filling line
 
:1)engineers abroad to install the complete filling line .
 
:2).We have two years' machine guarantee time
 
:3)We can help you design the bottles ,also labels, and calculate PE film size.(Becaue we have our own label and PE film making factory )
 
:4)We have good English translators to communicate with you .
 
:5)We have client cases in different countries , we can provide their production working video for you .