Instructions for use of rat thyroid stimulating hormone (TSH) ELISA kit

Rat Thyrotropin (TSH) ELISA Kit Instructions for Use This kit is for research use only.
Drug Name:
Generic name: Rat thyroid stimulating hormone (TSH) enzyme-linked immunoassay kit Purpose of use:
This kit is used to determine the content of thyroid stimulating hormone (TSH) in rat serum, plasma and related tissue samples.
Experimental principle This kit uses the double antibody sandwich method to determine the level of rat thyroid stimulating hormone (TSH) in the specimen. Microporous plates were coated with purified rat thyroid stimulating hormone (TSH) antibody to make solid phase antibodies. Thyroid stimulating hormone (TSH) was added to the monoclonal antibody-coated microwells in turn, followed by HRP labeled thyrotropin ( TSH) The antibody binds to form an antibody-antigen-enzyme-labeled antibody complex. After thorough washing, the substrate TMB is added for color development. TMB is converted into blue under the catalysis of HRP enzyme, and into the final yellow under the action of acid. The color depth is positively correlated with the rat thyroid stimulating hormone (TSH) in the sample. The absorbance (OD value) was measured with a microplate reader at a wavelength of 450 nm, and the concentration of rat thyroid stimulating hormone (TSH) in the sample was calculated by a standard curve.
Kit composition

1 20 times concentrated washing solution 30ml × 1 bottle 7 stop solution 6ml × 1 bottle
2 Enzyme label reagent 6ml × 1 bottle 8 standard products (1250μIU / L) 0.5ml × 1 bottle
3 Enzyme label coating plate 12 wells × 8 strips 9 standard dilutions 1.5ml × 1 bottle
4 Sample diluent 6ml × 1 bottle 10 instructions 1 copy
5 Developer A solution 6ml × 1 bottle 11 2 sealing film
6 Developer B liquid 6ml × 1 / bottle 12 1 sealed bag


Specimen requirements
1. The samples containing NaN3 cannot be detected because NaN3 inhibits horseradish peroxidase (HRP) activity.
2. Specimens are extracted as soon as possible after collection, and extraction is performed according to relevant literature, and experiments should be conducted as soon as possible after extraction. If the test cannot be performed immediately, the specimen can be stored at -20 ℃, but repeated freezing and thawing procedures should be avoided
1. Dilution and loading of standard products: set 10 standard wells on the enzyme-coated plate, add 100 μl of standard products in the first and second wells, and then add standard products in the first and second wells 50μl of diluent, mix well; then take 100μl from the first well and the second well and add them to the third and fourth wells respectively, and then add 50μl of standard diluent to the third and fourth wells respectively, mix well; Then take 50μl each in the third and fourth wells and discard it, then add 50μl each to the fifth and sixth wells, and then add 50ul of the standard dilution solution to the fifth and sixth wells respectively, and mix well; After mixing, take 50μl from the fifth and sixth wells and add them to the seventh and eighth wells respectively. Then add 50μl of the standard dilution solution to the seventh and eighth wells respectively. Take 50μl from the eight wells and add them to the ninth and tenth wells. Then add 50μl of the standard dilution solution to the ninth and tenth wells. After mixing, take 50μl from the ninth and tenth wells and discard. (After dilution, the volume of each well is 50μl, and the concentration is 900μIU / L, 600μIU / L, 300μIU / L, 150μIU / L, 75μIU / L)
2. Add samples: set up blank wells (the blank control wells do not add samples and enzyme reagents, the rest of the steps are the same) and the sample wells to be tested. Add 40μl of sample diluent to the test sample well of the enzyme-coated plate, and then add 10μl of the sample to be tested (the final dilution of the sample is 5 times). Add the sample and add the sample to the bottom of the well of the microplate, try not to touch the wall of the well, shake gently to mix.
3. Incubation: Seal the plate with a sealing plate and incubate at 37 ° C for 30 minutes.
4. Mixing solution: dilute 20 times concentrated washing liquid with distilled water 20 times and reserve
5. Washing: Carefully peel off the sealing film, discard the liquid, spin dry, fill each well with the washing liquid, let it stand for 30 seconds and then discard, repeat this 5 times, pat dry.
6. Add enzyme: add 50μl of enzyme label reagent to each well, except blank well.
7. Incubation: The operation is the same as 3.
8. Washing: The operation is the same as 5.
9. Color development: add 50μl of developer A to each well, then add 50μl of developer B, mix gently, and develop at 37 ° C in the dark for 15 minutes.
10. Termination: Add 50μl of stop solution to each well to stop the reaction (at this time the blue will turn to yellow).
11. Determination: Measure the absorbance (OD value) of each well in sequence with the blank air conditioner at zero and 450 nm wavelength. The measurement should be carried out within 15 minutes after adding the stop solution.

Calculate the standard concentration as the abscissa and the OD value as the ordinate. Draw a standard curve on the coordinate paper, and find the corresponding concentration from the standard curve according to the OD value of the sample; multiply by the dilution factor; or use the standard The linear regression equation of the standard curve is calculated from the concentration and the OD value, the OD value of the sample is substituted into the equation, the sample concentration is calculated, and then multiplied by the dilution factor, which is the actual concentration of the sample.
Precautions
1. The kit should be equilibrated at room temperature for 15-30 minutes before being taken out of the refrigerated environment. If the enzyme label coated plate is unopened, the strip should be stored in a sealed bag.
2. Crystals may be precipitated in the concentrated washing liquid, which can be heated and dissolved in a water bath during dilution, and the results will not be affected during washing.
3. The sampler should be used at each step of sample addition, and the accuracy should be regularly checked to avoid test errors. It is best to control the sampling time within 5 minutes. If there are many specimens, it is recommended to use a volley gun to add samples.
4. Please make a standard curve at the same time of each measurement, it is best to make a double hole. If the content of the test substance in the specimen is too high (the OD value of the sample is greater than the OD value of the first well of the standard well), please first dilute it with a certain multiple (n times) of the sample diluent and then determine it. When calculating, please multiply the total dilution Multiple (× n × 5).
5. The sealing film is limited to one-time use to avoid cross-contamination.
6. Please keep the substrate away from light.
7. Strictly follow the instructions, and the test results must be determined by the microplate reader.
8. All samples, washing liquids and various wastes should be treated as infectious agents.
9. The components of different batches of this reagent shall not be mixed.
10. If there is any difference with the English manual, the English manual shall prevail.
examination range:
50μIU / L -1000μIU / L
specification:
96 servings / box storage conditions and expiration date
1. Kit storage :; 2-8 ℃.
2. Validity: 6 months

MOVEPEAK is a people driven Pet Supplies products company, with more than 12 years of history, we believe our growth is due to the success & hard work of ordinary people and transforming extraordinary output, also have learned that success is as much about "how" you do something as "what" you do. And that the quality and value associated with the MOVEPEAK brand are not things to take for granted, not for a minute, that's why MOVEPEAK continuously adapts and innovates to keep an edge.

In this Pet Apparel & Accessories pages. You'll find our latest design Pet Dog Clothes ,Pet Cold Weather Coats, Pet Dog Raincoats,Pet Dog Bandanas,Pet Accessory, Dog Boots & Paw Protector .We also provide Pet Apparel OEM & ODM service,That means we can custom the Pet Apparel & Clothes  totally according to your design,logo,size and color.

Thank you for visiting our Pet Apparel web pages and supporting our pet supplies, and please check back frequently to see what new Pet Apparel and Pet Dog Clothes are available, and we sincerely welcome you to visit our company and discuss business with us, and hope to build a long-term business relationship on the basis of mutual benefit with you!

pet apparel

Pet Apparel & Accessories

Pet Apparel,Pet Accessories,Dog Apparel,Dog Jackets

Ningbo Movepeak Pet Supplies Co.,LTD. , https://www.petsupplies-factory.com