New milk bottle

Patent Name New Milk Bottle Patent Applicant Han Tianci Principal Applicant Address 110003 Shen Yang Youth Science and Technology Development Center, No. 6 Wenhua Road, Heping District, Shenyang City, Liaoning Province (2nd Floor of Youth League Committee) Inventor Han Tianci Application (Patent) No. 200420118335.5 Application Date 2004.10. 13 Approval date Approval Notice No. 2743274 Approval announcement date 2005.11.30 Instruction CD No. D0548 Main classification number B65D81/34 Classification number B65D81/34; B65D85/72; A45F3/16; A47J36/24 Division Original application No. New milk bottles, classified under the International Patent Classification, belong to the Ministry of Operations, the Ministry of Transport, and the Transport Division. They are used for the storage or transport of objects or materials such as bags, bottles, cans, transport containers, and packaging components. They are cut or worn. A specially constructed group of containers for perforating or tearing breakable elements or portions for opening. Its purpose is to solve the technical problem of automatic heating that can be recycled. It is mainly composed of a bottle cap, a bottle neck, a shell, a piston, a cavity, a feed port, and a plastic cap. Its characteristic is that the bottom position of the plastic cover is buckled at the top position of the feed inlet, the bottom position of the feed inlet is screwed on both sides of the top surface of the housing, and the top position of the piston is threadedly connected to the bottom outside position of the internal cavity. The outer position of the inner cavity is fixedly connected to the inner side of the housing, has a wide range of uses, and is simple to manufacture and easy to promote. Sovereign Items 1. New type milk bottle, which consists of bottle cap (1), bottle neck (2), housing (3), piston (4), cavity (5), feed inlet (6), plastic cover (7) The bottom position of the bottle cap (1) is fastened to the top of the bottle neck (2), and the bottom position of the bottle neck (2) is welded to the top of the inner cavity (5). The feature is: plastic cover (7) The bottom position of the inlet is fastened to the top of the inlet (6), and the bottom of the inlet (6) is screwed to both sides of the top surface of the housing (3).