Users who have used the salt spray test chamber know that the equipment is a product material and its protective layer is resistant to salt spray corrosion, so that the product material can better adapt to the corrosive environment in nature, and when the equipment simulates salt spray simulation, The spray formed by the nozzle is evenly dispersed throughout the working chamber. However, during the test, some faults that cannot reach the spray state may occur. To achieve an ideal salt spray test, it is necessary to have a certain understanding of the following contents. .
First, when the salt spray test chamber is insufficiently fogged
1) The spray regulator is placed too low, and the height of the spray regulator should be adjusted and adjusted;
2) The glass filter in the preheating tank is clogged, and the filter should be cleaned regularly for this case;
3) The pressure setting of the equipment is too low. This kind of phenomenon needs to adjust the regulating valve. It needs to be adjusted to a pressure of 1Kg/cm2. The pressure regulating valve on the air compressor needs to be adjusted to a pressure of 2Kg/cm2. .
2. When the salt spray test chamber cannot be sprayed and the nozzle is blocked
1) The air compressor stops running and the air compressor button is turned on;
2) The air compressor outlet main switch is not turned on, and the air compressor main switch is turned on;
3) The failure of the solenoid valve, the failure of the pressure gauge or the pressure is too low, it is necessary to notify the maintenance company to go to the door for maintenance;
4) When the nozzle is clogged, it is necessary to carefully remove the nozzle for cleaning.
Round Tube Trolley,Round Tube Collecting Kettle Trolley,Round Tube Kitchen Cart,Ss304 Round Tube Trolley
JiangMen Jushu kitchenware co.,ltd , https://www.galaxstainless.com