[China] net wardrobe so-called "whole wardrobe" refers to the factory custom size according to the site is complete, and then assembled on site wardrobe. The whole wardrobe should be divided into two parts: the cabinet board and the door panel. The old friends below will introduce the advantages and disadvantages of each material.
1, cabinet board
The commonly used wardrobe plates are no different from the appearance. They are all melamine film with a layer of imitation wood grain. However, when the plate is cut to see the internal materials, the difference is very big. There are MDF and moisture-proof plates (solid wood). Particle board), ecological board, etc., a material called "hexiang board" appeared on the market last year. The cost, price and durability of these panels are very different.
1 high density board
This is the most commonly used sheet for the whole wardrobe, because the cost is the lowest, it is pressed by waste paper pulp and glue, and the water will expand. No matter which brand of the overall wardrobe, as long as the use of high-density board, there will be an unpleasant smell after cutting, environmental protection is also unqualified.
2 moisture-proof board (solid wood particle board)
From the name point of view, it is known that the solid wood is granulated and then pressed with a glue to bond, retaining some of the physical properties of solid wood, better nail holding power, lighter texture, will not cause too much pressure on the wardrobe However, the bearing capacity is not weak, and the cost is low, and the cost performance is high. Therefore, it is often used in the manufacture of wardrobes. But after cutting, there will also be an unpleasant taste, and environmental protection is similar to high-density boards.
3 fragrant board
The crop straw slag is used as the main raw material, and MDI glue and functional additives are applied, which are produced by high temperature and high pressure. It is not only smooth and smooth, the structure is even and symmetrical, the board surface is solid, and it has the characteristics of good dimensional stability, high strength, environmental protection, flame retardancy and weather resistance. It also has excellent processing performance and surface decoration properties, and is suitable for various surfaces. Decorative processing and machining.
4 multi-layer board (ecological board)
On-site woodworking wardrobes, the original use of large core boards, in recent years generally used to use multi-layer boards, the overall cabinet and the overall use of the multi-layer board, is to use this kind of multi-layer board for the on-site wardrobe, posted on the outside Made of wood-like melamine film, the environmental protection index can achieve the E0 level of formaldehyde, which is the first choice for high-quality whole wardrobe cabinet.
If it is a well-ventilated space, such as a garden or a living room, you can use the MDF and the moisture-proof board cabinet from the perspective of saving money. However, if it is a space with poor ventilation, especially the bedroom, try not to use it. For environmentally friendly panels, it is recommended to use a more environmentally friendly and durable ecological board. When installing the wardrobe, remember to add moisture-proof nails at the bottom, so that the bottom of the wardrobe is about 2 mm from the ground to ensure the air circulation of the bottom and back of the wardrobe to prevent mildew.
There are also a lot of fakes in the overall wardrobe market. Some specialty stores use the banner of “Thanksgiving Specialsâ€. The plates for customers are not the brand that they distribute, but the local small workshops. The identification method and the whole kitchen The cabinet is the same: look at whether the sheet edge banding has the manufacturer's logo, and the plate produced by the regular manufacturer, the edge banding is generally thicker, and the sides are trimmed into a smooth and even curved edge.
2, wardrobe sliding door
The sliding doors of the wardrobe store are generally divided into two types: the original manufacturer and the merchants do the local small workshops. The former is more elaborate than the latter, and the purchase price is also large. The ex-factory price of the ordinary style is generally around 280 yuan/square. However, the locals only need 180 yuan / square. The sliding door of the whole wardrobe store to engage in "grateful specials" is generally made by local small workshops.
The sliding door frame of the wardrobe is made of aluminum alloy, and the middle part is divided into three types: tempered glass, MDF and PVC board. Among them, the most commonly used one is MDF. The price of MDF sliding doors in the same production channel is affected by two factors: the width and thickness of the aluminum alloy, and the treatment process of the MDF surface.
our gdsevencool provide the good quality lighted makeup mirror ,table makeup mirror, makeup mirror with lights,makeup mirror for desk ect style's mirror from China .
lighted makeup mirror manufacturer,table makeup mirror, makeup mirror with lights,touch screen LED makeup mirror
Zhongshan Seven Cool Electronics Technology Co.,Ltd , https://www.gdsevencool.com