Article 1, must pass the professional and safety, technical training of this type of work, pass the examination, and obtain the qualification certificate before they can hold the certificate.
Article 2, this box is a non-explosion-proof drying box. Do not put flammable or volatile items into the drying box.
Article 3, the average load of the sample shelf is 15 kg, and the test sample should not be overloaded or over-densified, and the test piece and other things cannot be placed on the heat dissipation plate.
Article 4, before installation, check the installation position of each heating wire of the heater to prevent accidents such as overlapping or collision of heating wires.
Article 5, check the electrical performance of the box before power-on, and pay attention to whether there is open circuit and leakage, and unscrew the exhaust valve on the top of the box, the gap is about 10mm.
Article 6, after turning on the power, turn the temperature control knob to the desired temperature, the temperature indicator light is on, the temperature starts to rise, and the blower can be turned on at the same time, and pay attention to whether the blower is running normally.
Article 7. When the temperature rises to the predetermined temperature, the constant temperature indicator lights up, and the temperature controller automatically controls the temperature. At this time, the sample is closed and the door is closed.
Article 8. If you want to observe the sample of the studio, you can open the door and observe through the glass door, but the door is not normally open.
Article 9, at the end of the work, stop the power supply, open the door and take out the sample.
1.ZF series of reflective shadowless lamp is widely used in various occasions operation lighting needs, is the ideal lighting equipment of modern operation room.
2. Full close streamline lamp body design completely meets the demand of the sterilization and high standard of laminar flow purification in operation room.
3. Adopting more than 5280 slices of reflection mirror, guaranteeing 1200 mm lighting depth.
4. Special design of color temperature compensation provides closer to that of natural sunlight and helps the doctor to distribute operation parts clearly and accurately.
5. The back-up battery will start work within 0.2 seconds automatically in case the main battery is damaged,ensuring the continuation of surgical operation. There`s failure indication in the handle control panel, to recommend the bulb to be changed after operation.
6. detachable handle jacket ,can be used for high temperature (≤134℃)sterilized.
7. Digital-control circuit offers many functions, with 10 segment brightness selection stepless lighting regulation, brightness memory, low voltage
start-up and power on self test etc.
8. The life-span of OSRAM halogen bulb is up to 1500 hours; the bulbs can be changed easily.
9. Germany ORSAM lamp socket,thermostability
10.Balance arm can be optional Germany imported or domestic.
11. mould Die-casting Eight edge type Revolving arm
Halogen Operating Light,Halogen Light Bulbs,Halogen Surgical Operating Light,Halogen Surgery Light
Shandong qufu healthyou Medical Technology co.,Ltd , https://www.kangerjianmedical.com